A follow-up here...
If I set ReaComp to limit output, then I get different limits depending on the selected oversampling (AA). Is that as should be expected?
Justin said:
Quote:
|
"if the "limit output" was checked [...] if AA is on, then the limiting happens at the higher rate so you might still get some smallish overs"
|
But what I see is the opposite:
Code:
AA Output
--------------------
None 0.0 dB
2x 0.0 dB
4x -1.1 dB
8x -1.4 dB
16x -1.5 dB
32x -1.5 dB
64x -1.5 dB
This is for a +1.0 dB sine wave from JS:Tone Generator, straight into ReaComp with ratio == 1.0, lowpass == 20000, and all other settings 0. And the output signal reads the same on ReaComp's output meter and on the Master.