|
|
|
09-22-2015, 11:09 AM
|
#1
|
Human being with feelings
Join Date: Aug 2012
Location: Anaheim, CA
Posts: 116
|
display midi hardware current cc settings?
Hello all,
I have a line 6 DT50 amp, which responds to approx. 30 cc commands. I am using Reaper's MIDI editor to set each cc parameter, creating, saving and recalling an overall "sound" on the amp. I will repeat this process, changing the cc parameters, to create additional "sounds" on the amp.
My process is, I create a MIDI track containing a short, recorded item in Reaper, then use the MIDI editor to access its cc values. This works pretty well, and can of course be saved in Reaper (the amp itself cannot save sound configurations without the purchase of additional line 6 hardware).
But the whole process is tedious. One thing I wonder: Is there a way for Reaper to "see" the current values of each of the 30 CC commands in use by the amp? It would be great to obtain a snapshot of current amp settings, then set about manipulating the data for new amp sounds rather than always input, input data into Reaper from scratch.
Thanks,
Lance
|
|
|
09-22-2015, 02:59 PM
|
#2
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
possibly if you look in the line 6 manual and find the sysex command that requests the amp to send current settings or send a sysex dump of them
|
|
|
09-22-2015, 06:51 PM
|
#3
|
Human being with feelings
Join Date: Aug 2012
Location: Anaheim, CA
Posts: 116
|
Thanks for the reply, mate! Sysex- there's something I've never known anything about. But after reading your response, I did search- and it appears it wasn't possible when this poster asked the same Q in 2013:
http://line6.com/supportarchivenew/thread/90053/
So I gather there's no 3rd party software ie: Reaper that can extract MIDI hardware settings. Dang.
|
|
|
09-23-2015, 02:12 AM
|
#4
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
That's a shame, without sysex info it will be very hard to get the info sent from the amp, however this may help you rather than trying to guess what cc messages you need to control the amp at least
http://line6.com/media/dt50/DT50_MID...vA_English.pdf
|
|
|
09-23-2015, 02:16 AM
|
#5
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
did a bit more searching, looks like it is possible to get a full sysex dump aor individual scene sysex dump directly from the amp
http://line6.com/support/page/kb/_/e...d-loading-r281
|
|
|
09-23-2015, 03:00 AM
|
#6
|
Human being with feelings
Join Date: Aug 2012
Location: Anaheim, CA
Posts: 116
|
Oh man,that's sweet! Thank you for the help. I will check it out and report back!
|
|
|
09-23-2015, 04:02 AM
|
#7
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
Yeah please do, if you can get the sysex info out it should be fairly straightworward
|
|
|
09-23-2015, 10:05 PM
|
#8
|
Human being with feelings
Join Date: Aug 2012
Location: Anaheim, CA
Posts: 116
|
Okay, so I already had the Line 6 DT50 Midi implementation chart- I've been using that to manually input data into Reaper's Midi editor.
As for Midi OX- I downloaded the program and am trying to perform a Sys Ex dump, but no luck. Nothing happens, even though Midi Ox Does seem to have a connection with the DT50 amp.
I noticed your Line 6 link is for a page about M5/M9/M13. Are you sure DT50 supports Sys Ex? I've searched, but haven't been able to confirm this. And like I said- I can't get anything started as far as a Sys Ex transfer.
|
|
|
09-24-2015, 01:05 AM
|
#9
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
one thing worth checking. your not using one of those cheap chinese midi to usb interfaces that have the musical clef symbol on them are you. They lock up with midi data dumps
|
|
|
09-24-2015, 01:46 AM
|
#10
|
Human being with feelings
Join Date: Aug 2012
Location: Anaheim, CA
Posts: 116
|
It is a midisport uno 1x1.
|
|
|
09-24-2015, 03:27 AM
|
#11
|
Human being with feelings
Join Date: Jan 2013
Location: Newcastle UK
Posts: 474
|
should be ok then
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 01:07 AM.
|