Go Back   Cockos Incorporated Forums > REAPER Forums > Recording Technologies and Techniques

Reply
 
Thread Tools Display Modes
Old 09-30-2014, 02:30 PM   #1
Mojitov
Human being with feelings
 
Join Date: May 2011
Posts: 32
Default Anyone own M-Audio Delta 4x4 audio interface? Need help with cable pinout

Hi all,

I have a M-Audio Delta 4x4 audio interface (PCI) that I bought used. It has a thick breakout cable with female 15-pin D type connector going into the card and a similar male connector going into a breakout box. I need to resolder the connector on the box side - the previous owner seems to have repaired it poorly, so I have to redo it. Does anybody have the pinout for it? If not, can you disassemble that connector on your cable and tell me which wire color goes to which pin?

I disassembled mine and figured out an approximate pinout. I now need to confirm it. It looks like this (looking from the side of the pins, the upper row has 8 pins, the lower has 7 pins):

Pink Purple Yellow White NC Green Blue(S)+Black(S) Black
Red(S)+Purple(S) NC White(S)+Yellow(S) NC Grey Green(S)+Grey(S) Blue

Legend:
ColorName - signal wire
ColorName(S) - shield of the wire of that color
NC - not connected

As you can see, the inner (single wire) shields seem to be connected in pairs. The outer shield of the whole cable is not connected to any pin. This may or may not be correct.

Can anyone confirm?
Mojitov is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.