Gang faders (DONE)

[One flew over]

When multiple channels in the mixer are selected their volume faders gets ganged. Good thing IMO.
But, it would be nice if their relative values stays until you release the mouse button. Example:
Two channels. One with fader @ 0 and the other at -20.
Select both channels and move the faders all the way up. Both fader are now at max. We haven't yet released the mouse button. Now bring the faders down and they are at equal value.

[Dstruct]

100% agreed.


DONE (3.04)

[StepOne]

+1

Although it is easy to avoid this - either increase the volume fader range if you are majoring turning the volume up, or, probably a better idea, mix by turning down, then increase the volume on the buss tracks.

If individual tracks are so low that you are having to increase the volume far over 0db, I would recommend normalizing the tracks and mixing downward.

[One flew over]

@StepOne:
It was nothing but an example. ;)
A better example would perhaps be if you turn all the ganged faders to 0 and turn them up again which gives the same result - all faders at equal level.