Reaper XT1 workaround
I posted this on another thread but FYI
So by accident I had XT1 up and running well with with Studio One. I then closed S1 and opened Reaper without changing the XT1 to be configured to Reaper. Lo and behold it worked and it followed track selected on the daw that was selected by mouse click! I haven't tried everything but it's an odd start.
Edit update: Using S1 Template
Pan and Pan to center works
Beats/Time, Master,Ch select, Mute, Solo, and Rec Ch all buttons work
Automation buttons work
Auto punch button works
Metronome button works
Marker Jump button creates a marker
All view buttons and add send, add insert buttons do not work
Transport buttons all work
Zoom and Marker select work
Bank select and ch select work but quirky (ascending thru channels requires a double click on the ch button. Descending works normally. Track selected in daw via mouse follows track in XT1, even beyond the bank
Scribble strip display is correct and fader moves as expected. Jog wheel and undo works.
Scroll up/down and Zoom works
Marker select does not work it zooms horizontally
All preliminary tests but still a viable work around.
NOTE: You need to configure XT1 to be in S1 mode BEFORE you open Reaper
Configuring XT1 while Reaper is open has poor results.
|