View Single Post
Old 05-21-2019, 04:09 AM   #3
BlessedOne72
Human being with feelings
 
Join Date: May 2007
Location: Salo, Finland .
Posts: 500
Default

Quote:
Originally Posted by Coachz View Post
In the metronome in Reaper you can click the io button at the top and Route The Click out to some separate channels. For example let's say your Reaper Master track IO goes out channels 1 and 2 to your main speakers. Then you create a another track called HP headphone mix that has all of your top level folders routing to it and it's IO goes out on channels 3 and 4.

Then to have an independent click just for the drummer you would take the io from the metronome and Route it out on channels 5 and 6. Also send top level folders to 5 and 6. You take the outputs of your Tascam on channels 3 and 4 and run that to your power play so everyone gets that headphone mix except the drummer.

The problem is the PowerPlay seems to only have one left and right input so everyone will get the same headphone mix. You could pick up another little headphone amp like a PreSonus HP4 or if you have high-end headphones something with a lower impedance ability and then take the channels from The Click which are channels 5 and 6 and Route those to it and those headphones go to the drummer. This way The click is only sent to the drummer with the HP mix.
What about this Behringer Product ;

https://www.thomann.de/gb/behringer_miniamp_amp_800.htm

Compact 9.5 headphone amplifier for studio and live use
4 independent stereo amplifiers
Highest sound quality with virtually all headphones, even at maximum volume
Volume control with 6-digit LED output meter display per channel for precise level control
2 balanced stereo inputs with independent level and balance controls that allow for individual mixes
Separately switchable on all 4 channels
6-digit LED input level meter for precise level indication of both line inputs
2 headphone outputs per channel on the front and rear side allow simultaneous connection of 8 headphones
Several headphone amplifiers can be connected via the parallel link output
Extremely low-noise operational amplifier system for an excellent sound quality
All models from the Mini Series can be stacked on top of one each other to create an ultra-compact signal processor solution

Would it be suitable ?

- BOne -
BlessedOne72 is offline   Reply With Quote