Quote:
Originally Posted by jpanderson80
So, you are inserting a plugin on the REAPER Master... then the audio is routed out to your console on a channel, say 1-2. And Console Channels 1 & 2, are still routed to the Console Master which is getting slammed. Is that correct?
If so... you are so close to a solution! If the above is correct try this: turn the Reaper MASTER hardware output down to -18dBfs (or whatever you need for your console specs). This will drive Console channels 1 & 2 to 0vu and THEN it will push your Console Mains into the sweet spot at unity as well.
|
Hi
regarding Mastering i had the stereo mix in reaper which was routed out to the console master buss ch 29/30
Also i had vst plugins on the master bus which made the analogue channel unhappy
I returned the stereo mix back into reaper & noticed clipping noise
so i guess im saying im trying to master my mix which makes the analogue ch unhappy but i need to raise the level to get a decent master but im not sure how configure this yet
Alot of head scratching