Configure m-vave chocolate with amplitube 5 in Reaper

[Gabri80]

Actually, I have configured the midi m-vave chocolate controller to change the presets in the Ampltube 5 plugin.
I have created a midi track that is routed to an audio track where my Amplitube plugin resides.
I am able to switch between the presets with the 4 midi switches from my midi controller, but when I try to assign MIDI in order to switch ON/OFF a single pedal in Amplitube it doesn't work.
I'm on Windows 10 O.S. using the Midi Berry and loop midi to make it work.
It works without this issue in the Amplitube standalone version.
Someone can show me the way to solve the problem?

Thank You.

[mschnell]

I don't understand much of what you are describing.

Anyways where do you try to define that the "switch ON/OFF a single pedal" is a toggle function rather than a momentary switch like the preset change ?

[Gabri80]

Yes, the toggle function does not work properly.
I can only switch on the pedal, and then it stop working.

[mschnell]

Sorry. I don't understand your meaning.

[Gabri80]

In short.. The m-vave chocolate has 2 modes when working with Amplitube:

1 - When the button is pressed for a long time (2/3 sec) Amplitube will switch the preset that has been set previously. (If I press button 1, preset 1 will be loaded).
2- When the button is pressed for a short time, Amplitube will toggle on/off the pedal or the effect that was set previously.

The issue is on the press short function, that in Reaper doesn't work.

[mschnell]

If this is Midi, you can use ReaControlMidi to show a log of the Midi events and then watch if they are what you suppose they should be: e. g. a message when pressing a button and one releasing it (momentary mode of the switch <not of Amplitube> ) or: a message when pressing the button and another message when pressing it again (toggle mode of the switch) ).

[Gabri80]

I've checked Midi events in the ReaControlMidi log, but they are OK.

[mschnell]

Originally Posted by Gabri80

I've checked Midi events in the ReaControlMidi log, but they are OK.

Hence the plugin does not react as expected ?

[Gabri80]

Exactly...

[mschnell]

dead end ?