|
|
|
06-14-2008, 07:08 AM
|
#41
|
Human being with feelings
Join Date: Oct 2006
Posts: 31
|
Quote:
Originally Posted by bennals
In Reaper you have to set up a track to operate as a conduit for both midi and audio. Then you set up more tracks to accept audio coming from Reason, and more again to send MIDI to Reason and all of it gets routed through that original conduit track.
Bill.
|
WAIT A GODDARNED MINUTE!!... Whta are you doing here.. you confabulated me... Now I am a long time Reaper user on the PC, but having switched to Mac have only just tried the X Version... but on the PC version, there was simply an effect (Rewire blah di blah) that you added to a track and lo and behold Reason would launch, and synch right to Reaper, with Reasons Stereo out being routed into this track on Reaper. Now.. what was it you did..?
Is this PC method gonna be implemented, or is it already another way that I cant see (am a computer dunderhead)
yours
Mark
|
|
|
06-14-2008, 08:39 AM
|
#42
|
Administrator
Join Date: Jan 2005
Location: NYC
Posts: 15,746
|
Quote:
Originally Posted by MarkFrancombe
WAIT A GODDARNED MINUTE!!... Whta are you doing here.. you confabulated me... Now I am a long time Reaper user on the PC, but having switched to Mac have only just tried the X Version... but on the PC version, there was simply an effect (Rewire blah di blah) that you added to a track and lo and behold Reason would launch, and synch right to Reaper, with Reasons Stereo out being routed into this track on Reaper. Now.. what was it you did..?
Is this PC method gonna be implemented, or is it already another way that I cant see (am a computer dunderhead)
yours
Mark
|
The same way should work on OS X as on Windows.. for me I see "Rewire: Reason" in my FX list..
|
|
|
06-14-2008, 11:24 AM
|
#43
|
Human being with feelings
Join Date: Oct 2006
Posts: 31
|
Quote:
Originally Posted by Justin
The same way should work on OS X as on Windows.. for me I see "Rewire: Reason" in my FX list..
|
Well I checked, double checked, and triple checked... no Rewire:Reason shows up in MY effects list!!!
Great News though! Hope you can figure it out..
|
|
|
06-14-2008, 12:13 PM
|
#44
|
Human being with feelings
Join Date: Jan 2007
Location: Erfurt
Posts: 790
|
Toontrack works
Quote:
Originally Posted by axel_ef
It works good on my 10.4.9, but with Toontrack EZDrummer (AUi) I have no sound from the drums.
|
I tested it once more and find that it was only when playing grooves on the toontrack gui. Drag and drop to the track works, the sound is playing now.
But all that works only with the VSTi, loading as AUi crashes Reaper.
|
|
|
06-14-2008, 03:54 PM
|
#45
|
Human being with feelings
Join Date: Apr 2008
Posts: 262
|
hmm, my MIDI dropped data problem went away when i plugged the keyboard in thru an actual MIDI cable rather than the usb connection, however the usb connection worked fine on other hosts
i don't know what to make of that, but at least i have a workaround.
|
|
|
06-15-2008, 05:57 AM
|
#46
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Quote:
Originally Posted by MarkFrancombe
WAIT A GODDARNED MINUTE!!... Whta are you doing here.. you confabulated me... Now I am a long time Reaper user on the PC, but having switched to Mac have only just tried the X Version... but on the PC version, there was simply an effect (Rewire blah di blah) that you added to a track and lo and behold Reason would launch, and synch right to Reaper, with Reasons Stereo out being routed into this track on Reaper. Now.. what was it you did..?
|
Sorry for the confusion. Yes, you still launch that plugin to set up a connection with Reason. I guess having it all go through one track (the one I called the conduit) in Reaper, then bussing the different outputs from Reason from that one conduit track to wherever you want it to go is different to the way I'm familiar with in DP.
Justin, do I understand it right that you cant instantiate more than one of the Reason:Rewire plugins in a single project?
Bill.
Last edited by bennals; 06-15-2008 at 05:59 AM.
|
|
|
06-15-2008, 06:36 AM
|
#47
|
Administrator
Join Date: Jan 2005
Location: NYC
Posts: 15,746
|
Quote:
Originally Posted by bennals
Sorry for the confusion. Yes, you still launch that plugin to set up a connection with Reason. I guess having it all go through one track (the one I called the conduit) in Reaper, then bussing the different outputs from Reason from that one conduit track to wherever you want it to go is different to the way I'm familiar with in DP.
Justin, do I understand it right that you cant instantiate more than one of the Reason:Rewire plugins in a single project?
Bill.
|
You should be able to instantiate different ReWire applications, but correct you cannot create 2 of one app.
If you want control over more of the I/O, then you can route the outputs to other tracks etc...
|
|
|
06-15-2008, 12:55 PM
|
#48
|
Human being with feelings
Join Date: Oct 2006
Posts: 31
|
Quote:
Originally Posted by bennals
Sorry for the confusion. Yes, you still launch that plugin to set up a connection with Reason.
Bill.
|
BUT.. Where IS that plugin... I promise... I just dont see it in my FX list!!! Aint there! Is it a inbuilt bit of Reaper Justin, or could I have neglected to do something else on my system, like a weird Reason installation?
|
|
|
06-16-2008, 05:44 AM
|
#49
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Quote:
Originally Posted by MarkFrancombe
BUT.. Where IS that plugin... I promise... I just dont see it in my FX list!!! Aint there! Is it a inbuilt bit of Reaper Justin, or could I have neglected to do something else on my system, like a weird Reason installation?
|
Do you see a Rewire subsection between 'Instruments' and 'AU' when you hit the 'Add' button in the FX chain window?
|
|
|
06-16-2008, 01:56 PM
|
#50
|
Human being with feelings
Join Date: Jun 2008
Posts: 45
|
Anyone have the transport disappear when you choose View-Mixer? Not all the time--I'm not seeing a pattern.
If you uncheck View-Transport and then go back in and recheck, it comes back and stays if the mixer's open and you close and open the mixer.
MacBook Pro 2.16gh, 2 gigs Ram, Running 10.4.11
|
|
|
06-16-2008, 02:58 PM
|
#51
|
Human being with feelings
Join Date: Sep 2007
Location: Brooklyn, NY, USA
Posts: 26
|
10.5.3 and a coupla issues
Just setting up a new MBP 2.6ghz 4gb ram, 10.5.3
1) Reaper crash with another app (Traktor) open; launches fine after closing other app. will test more cases.
2) With demo project open, fails to open another .rpp by double-clicking on the second one, but will load from file menu.
|
|
|
06-16-2008, 09:00 PM
|
#52
|
Human being with feelings
Join Date: Sep 2007
Location: Brooklyn, NY, USA
Posts: 26
|
Crash on VST clear cache and rescan
Yeah. That's about it. MBP 2.6g 4gb RAM 10.5.3
db: email me at open labs if you want the crash dump.
|
|
|
06-17-2008, 01:40 AM
|
#53
|
Human being with feelings
Join Date: Oct 2006
Posts: 31
|
Quote:
Originally Posted by bennals
Do you see a Rewire subsection between 'Instruments' and 'AU' when you hit the 'Add' button in the FX chain window?
|
No I dont.. !!! Is it something I should have installed with Reason?
|
|
|
06-17-2008, 01:52 AM
|
#54
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Quote:
Originally Posted by MarkFrancombe
No I dont.. !!! Is it something I should have installed with Reason?
|
It's not something you need to install separately from Reason. Try looking in this folder on your hard drive:
Hard drive/Library/Application Support
You should see a folder named 'Propellerhead Software'.
Inside that folder should be another folder named 'Rewire' and in that should be some files called 'Rewire', 'Rewire.bundle' and 'Reason Engine.plugin'.
If you have all those files you should be ok. I'd try a 'Reaper' reinstall if that is the case. If those files aren't there, I'd do a complete reinstall of Reason.
Bill.
|
|
|
06-18-2008, 03:32 PM
|
#55
|
Human being with feelings
Join Date: Jan 2007
Location: in the middle of the icecube.
Posts: 7,403
|
I encountered a strange issue last night for the first time...
Probably Pilot error, but no matter what I did, the Arrange Window would not allow any other window on top/over it. No other Reaper window (ie. the midi editor would hid behind the arrange window), and no other Leopard window.
Last night's workaround was to send the arrange window to the dock to edit midi notes... or peek at this forum.
Interesting note: When the arrange window was in the dock and I changed screen sets, the arrange would stay in the dock, but restore to the correct position for the active screen-set. that was cool.
.t
|
|
|
06-18-2008, 09:03 PM
|
#56
|
Administrator
Join Date: Jan 2005
Location: NYC
Posts: 15,746
|
Yeah, there's some wonkiness due to the hackery required to make REAPER windows stay above the main REAPER window.. I'll see if I can't improve it..
|
|
|
06-18-2008, 10:56 PM
|
#57
|
Human being with feelings
Join Date: Jan 2007
Location: in the middle of the icecube.
Posts: 7,403
|
Quote:
Originally Posted by Justin
Yeah, there's some wonkiness due to the hackery required to make REAPER windows stay above the main REAPER window.. I'll see if I can't improve it..
|
you are awesome!
thanks!
.t
|
|
|
06-19-2008, 02:14 AM
|
#58
|
Human being with feelings
Join Date: Nov 2007
Location: Cologne/Bishkek
Posts: 1,258
|
got some weird behavoir of docking battery3. sometimes if it is docked, it appears in all dock-windows and cover the mixer, the midieditor..whatever there is next to the battery3-dock-window.
as I free the pluginwindow from the docker, everything seems normal, but from this time on I can´t change the drumkits in battery3. the scrollmenu doesn´t open anymore.
if there´s time...anyone of your script-professionels should check this.
|
|
|
06-23-2008, 02:06 PM
|
#59
|
Human being with feelings
Join Date: Jun 2008
Posts: 3
|
slow macs and current build
For those not sure if they want to take a dip with their old macs, I offer my personal experience:
1Ghz, 512mb, G4 powerbook, OSX10.5, firewire to Tascam 1804
Fired up this build of reaper last night, recorded a live session (18 inputs) at 24-bit without a single click or stutter.
With a bit of ingenious routing and sparing use of processor-hungry fx, a perfectly serviceable demo popped out the other end. (Remember, kids, offline track rendering for processor-heavy fx is an easy way of cutting the processor overhead)
Bottom line- don't bin your slower mac; look on it as a blast-proof (and cheaper) multitrack.
|
|
|
06-23-2008, 03:29 PM
|
#60
|
Human being with feelings
Join Date: Sep 2007
Location: Montreal, QC
Posts: 518
|
Quote:
Originally Posted by turtles
For those not sure if they want to take a dip with their old macs, I offer my personal experience:
1Ghz, 512mb, G4 powerbook, OSX10.5, firewire to Tascam 1804
Fired up this build of reaper last night, recorded a live session (18 inputs) at 24-bit without a single click or stutter.
With a bit of ingenious routing and sparing use of processor-hungry fx, a perfectly serviceable demo popped out the other end. (Remember, kids, offline track rendering for processor-heavy fx is an easy way of cutting the processor overhead)
Bottom line- don't bin your slower mac; look on it as a blast-proof (and cheaper) multitrack.
|
What buffer size did you use?
|
|
|
06-23-2008, 08:58 PM
|
#61
|
Human being with feelings
Join Date: Jun 2008
Posts: 67
|
While trying to put together an illustrated Reaper OS X installation manual for a friend of mine I ran into some issues. Most notably, I could not finish writing the manual because the system kept crashing.
Problem: The system frequently crashes in conjunction with Reaper. The crashes occur in two types.
Type 1: Reaper runs fine and closes properly. A short while later (usually less than 3-5 minutes) normal system operations (such as web browsing) cause the "gray restart screen" to appear.
Type 2: Running Reaper at the same time as other programs causes the "gray restart screen" to appear. This time the error happens while Reaper is still running. For instance, I have been unable to run "Grab" for very long while running Reaper and ditto for FireFox.
Note: The crashes only happen on boots where Reaper has been run. I've been spending the last couple hours testing reproducibility and have only been able to get crashes on boots where I run Reaper.
System: G5 Dual 2.5 GHz
OS: OS X 10.4.8 and 10.4.10 (different partitions)
Has anybody else encountered similar difficulties? Any idea what might be causing the problem?
I have already tried running Disk Warrior and Disk Utility; flushing the "Reaper" folder in "Applications"; hiding VSTs from Reaper; switching audio interfaces and running on the versions of OS X mentioned above.
|
|
|
06-23-2008, 10:02 PM
|
#62
|
Human being with feelings
Join Date: Mar 2007
Posts: 340
|
I've not seen that behaviour at all,
REAPER runs like a top over here.
What audio interface are you using? Have you tried just using internal audio to eliminate the audio drivers as a variable?
|
|
|
06-24-2008, 01:09 AM
|
#63
|
Human being with feelings
Join Date: Jun 2008
Posts: 67
|
Quote:
Originally Posted by kerryg
REAPER runs like a top over here.
What audio interface are you using? Have you tried just using internal audio to eliminate the audio drivers as a variable?
|
Yes, that was one of the first steps I took. Running with built-in audio did not change the results.
|
|
|
06-24-2008, 08:07 AM
|
#64
|
Human being with feelings
Join Date: Sep 2007
Location: Montreal, QC
Posts: 518
|
The only real recording session I did with Reaper took something like 4 or 5 hours non stop without a glitch.
Also I mixed 2 songs for a friend, took a whole day without a glitch.
Macbook 10.4.8 at the time. I don´t remember Reaper version I was using...
|
|
|
06-24-2008, 03:33 PM
|
#65
|
Human being with feelings
Join Date: Jun 2008
Posts: 3
|
Quote:
Originally Posted by Jeronimo
What buffer size did you use?
|
Whatever Reaper's standard settings are... didn't change anything. Installed the tascam drivers, installed reaper, connected the two together, that was it.
Me Like.
|
|
|
06-24-2008, 03:38 PM
|
#66
|
Human being with feelings
Join Date: Sep 2007
Location: Montreal, QC
Posts: 518
|
Quote:
Originally Posted by turtles
Whatever Reaper's standard settings are... didn't change anything. Installed the tascam drivers, installed reaper, connected the two together, that was it.
Me Like.
|
If you don´t mind taking a look at it...
I think it´s under preferences/audio
You didn´t do any overdubs right? Just regular live recording?
|
|
|
06-25-2008, 11:43 AM
|
#67
|
Human being with feelings
Join Date: Jun 2008
Posts: 3
|
Reaper's buffer is set at 1200ms, Tascam driver native latency set at 2ms, sampling at 44100. Default disk read and write buffers.
I was just doing a straight multitrack record of a live stage. No overdubs.
Mixing down later, I got 4 EQs, 1 reverb set up as a send, 1 chorus as a single-track insert, and a multiband compressor over the master, before things started getting clicky in the audio playback. I used the bundled VST EQ and the Apple AU reverb and multiband comp. Usual use of level/fx/eq automation in there too.
Admittedly it's not going to cut it for heavy use of convolution reverbs or big chorus fx, but I'd probably process those offline first, I think.
The fact that Reaper can do this in a pre 1.0 build, on fairly aged PPC kit, is not far short of amazing.
|
|
|
06-26-2008, 01:59 PM
|
#68
|
Human being with feelings
Join Date: Nov 2006
Location: Finland
Posts: 1,528
|
When trying to render to mp3, I get the error message familiar from the windows side:
"Error: I need lame_enc.dll to encode MP3!"
Now, correct me if I'm wrong, but OS X doesn't use dll files.
__________________
______ Announcing__mrelwood plugins______
.. MacBook Pro 16" Late '19 .. Scarlett 6i6, Saffire Pro 24 DSP (+ADA8000) .. FCA610 .. EVE SC207 .. Focal: Shape 65, Alpha 65, CMS 40, Listen Pro ..
|
|
|
06-27-2008, 04:41 AM
|
#69
|
Human being with feelings
Join Date: Jun 2008
Posts: 126
|
Excellent work!
|
|
|
06-28-2008, 03:37 PM
|
#70
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Just noticed another quirk with Kjaerhus Audio's MPL-1 Pro SE. The settings don't seem to get saved with the project. Each time you re-open the project the settings revert to the default. It's the only plug I've seen that does it so far but I haven't really been checking that closely.
Also, the free AU transient shaper from Flux 'Bittersweet II' crashes Reaper consistently. It works fine in DP. Audio Damage's 'Reverence' doesn't pass audio either.
Cheers.
Bill.
|
|
|
07-01-2008, 02:14 PM
|
#71
|
Human being with feelings
Join Date: Jul 2008
Posts: 2
|
Due to Steinberg bad policy and lack on intelligence
REAPER will Kick steinberg s ass
they recently changed their prices from 899 to 599 e !!! (not dollars)
I think it s not enough
it s pathetic
I m keeping an eyes on reaper on mac AND pc cause I need a sequencer for BOTH platforms
So as soon as the mac osx version is stable and that I can work on pc AND mac I just change sequencer
And if it Worx from an USB key ?? EVEN better
You go to the recording studio or a band s place yopu can work with you own license
THAT is great !!!
No dongle no nothing
I will spread the word around me and BLOG about it I have a 54 000 visits and it s growin and growin
I give you a tip : Howie B produced me one single
:b
|
|
|
07-03-2008, 05:14 PM
|
#72
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Hello everyone.
I mentioned this before in relation to what seemed to be a quirk running Reaper on a hackintosh but it seems it may not be limited to that.
Using the shift key as a scroll wheel modifier (to go left and right in the conventional manner) doesn't seem to work in conjunction with a USB mouse plugged into my fully legit MacBook either (1.83, 10.4.11). It does work with the trackpad built into the Macbook however. I've tried setting the trackpad to be ignored when a USB mouse is plugged in via System Preferences but it made no difference.
Can someone running Reaper on a Apple desktop machine (without a trackpad) please check whether the shift key works as a modifier for the scroll wheel?
If not, perhaps that could be looked at Justin.
Also, I would love it if using the scroll wheel (or navigating via the keyboard) could be made to operate more smoothly or with a finer degree. Sometimes when zoomed in, scrolling left or right results in such a large jump that I can lose where I am. It also seems that one scroll action down is equivalent to two scroll actions up (they're not symmetrical, if you know what I mean).
Cheers.
Bill.
|
|
|
07-04-2008, 01:00 AM
|
#73
|
Human being with feelings
Join Date: Apr 2008
Posts: 262
|
with the mouse over the middle of the window the scroll wheel changes zoom, alt scroll modifies it to scroll left and right
vertical scroll on the right hand scroll bars appears symmetrical
shift and scroll wheel stops the wheel working
Mac G5 dual 1.8ghz osx 10.4.11
Last edited by Tom Drinkwater; 07-04-2008 at 01:03 AM.
Reason: edited cos i got alt and shift confused...
|
|
|
07-04-2008, 01:28 AM
|
#74
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Thanks Tom. That would seem to confirm my findings on the shift key. Clicking on the scroll buttons is symmetrical here as well, but it's the scroll messages sent by the scroll wheel and keyboard command that appear asymmetrical.
Any chance of a look at this one Justin? I use other apps where shift to scroll left and right are used all the time and I'm getting confused when I come back to Reaper.
Cheers.
Bill.
|
|
|
07-05-2008, 11:16 AM
|
#75
|
Human being with feelings
Join Date: Jul 2008
Location: Glasgow, Scotland
Posts: 1
|
I shall be a willing tester :-)
__________________
Why is all the software so expensive :-s
|
|
|
07-11-2008, 09:40 AM
|
#76
|
Human being with feelings
Join Date: Nov 2007
Location: Massachusetts, USA
Posts: 2,248
|
Latest release (2.4)
DOWNLOAD
|
|
|
07-11-2008, 05:58 PM
|
#77
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Yes, I was waiting for this thread to be updated by Justin before mentioning that there seems to be some glitchy graphics happening on the main page (after vertical scrolling) with this build (not present in 2.31 build). But, now that the cats out of the bag...
Bill.
__________________
Macbook C2D 1.83, 10.6.4, MH ULN-2 & 2882 x 3.
Last edited by bennals; 07-11-2008 at 06:08 PM.
|
|
|
07-11-2008, 06:29 PM
|
#78
|
Human being with feelings
Join Date: Mar 2007
Posts: 340
|
I can reproduce the glitchy scrolling here too.
Or I should say graphics. I get around it by switching to another theme and back, but it's a bit tiresome.
|
|
|
07-12-2008, 06:18 PM
|
#79
|
Human being with feelings
Join Date: Feb 2008
Location: Brisbane, Australia
Posts: 244
|
Yes, even calling up the mixer then closing it seems to reset the graphics correctly (I don't have the mixer docked).
__________________
Macbook C2D 1.83, 10.6.4, MH ULN-2 & 2882 x 3.
|
|
|
07-14-2008, 08:59 AM
|
#80
|
Human being with feelings
Join Date: Jun 2008
Posts: 4,923
|
Plogue Bidule GUI wierdness
Using the Plogue Bidule VSTi you get all kinds of wierdness - gui disappears when clicked - can reappear behind and above the fx window - clicking the GUI button in the fx window closes the fx window - bits of the gui can persist when the fx window is closed etc etc.
this is the 2.4 @ LandOLeet G5 os 10.4.9
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 06:12 AM.
|