X32 Recording Setup
Hi all, I'm attempting to use an M32 and DL32 for recording, and this beast is definitely up to the task! For the most part, I will just be monitoring the output from REAPER when recording, and I'd like to set it up like this. Is what I want possible?
1 Recording configurations:
Record config 1:Send 32 mic pres from DL32 to USB
Record config 2:Send 1-24 from DL32 to USB and local 25-32 to USB
2 Returns from DAW:
Return 8 channels from REAPER
1&2 Master Fader from REAPER
3&4 Headphone Mix 1 from REAPER - need a way to quickly monitor these to check them from time to time
3 Sources:
Input stereo out from MOTU 2408
4: Source select, needs to be on top level buttons
Use buttons to select between 1&2 from REAPER, 3&4 from REAPER or MOTU output to send to the speakers
5: Speaker Sends, needs to be on top level buttons
Use buttons to switch between two sets of speakers if possible
6: DAW Control. I plan on using X32 REAPER from Patrick-Gilles Maillot, and also to contribute to the Control Surface Integration project, which will mean some OSC work. Becuase of this I don't think I want any audio actually going through the main channels, as I will be using the faders, pans and mutes and possibly more to control REAPER
8: Outputs to the headphones
send 1&2 Master Fader from REAPER to Output 1&2 on the DL32
Send 3&4 Headphone Mix 1 from REAPER to Output 3&4 on the DL32
Again, I'll need a way to hear these from time to time
9: Talkback to the headphones, not sure how to deal with it coming through 1 and 2 which would be the control room sends as well
Notes:
I do have a Presonus Centralstation that I can use in place of 4 and 5, but if I do, I need to figure out how to send the local busses to the central station.
|