|
|
|
06-11-2019, 03:39 AM
|
#401
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
I have a few notes though haha: - Maybe add a button to renumber the nodes according to their frequency position? Especially because the arrows in the panel to switch node follow the numbering system, not the position (which could be annoying).
- I think the panel would benefit in having a more colored still semi-transparent background
- When the panel button is engaged there's no dB indication on the right below -18
- When the panel button is engaged, the panel is open and you click somewhere else the panel disappears (which is fine) but the gui does not reflect this new state.
- Could you please add a double click function to reset the frequency, gain and q-factor buttons in the panel?
- In the panel the red cross is a bit ambiguous... one could think it's used to closed the panel and not to delete the node (and ReEq doesn't have any undo points...)
With those changes I think ReEq would be really close to the Fabfilter.
Just my 2 cents other than that I like it a lot!
Last edited by DaveKeehl; 06-11-2019 at 03:57 AM.
|
|
|
06-11-2019, 04:15 AM
|
#402
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by sai'ke
Very nice man!
It's great to see that you're still pushing this beaut forward! Even though I'm an audio first kinda guy, I do like the visual improvements!
|
Thanks! Still chipping away...
|
|
|
06-11-2019, 04:19 AM
|
#403
|
Human being with feelings
Join Date: Nov 2018
Posts: 1
|
Bug pressing listen on Low Cuf 6dB/oct
Hi and thank you for this fantastic plugin. I found a little bug: when you press "Listen" on a Low Cut Band with 6dB setting, pressing again doesn't remove the listen bandpass. As a workaround I now select another band and press listen two times to remove the listen mode.
|
|
|
06-11-2019, 04:37 AM
|
#404
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by HDWind
Nitsuj
Thank you very much for the new version and the added innovations.
I found dificulty in work process, in new version.
Example: If I first click on the playback in the reaper, and then move any band in the equalizer.
Onward, then does not work playback through a spacebar, on the keyboard.
The focus of the window changes and the hot keys stop working.
If I pressed the spacebar to play in the reaper, nothing happens.
In previously version (19th May 2019), everything was normal and playback always worked.
Please fix it.
|
Thanks for the feedback. I wondered if this would come up.
I changed ReEQ so that it gets all keyboard input when it has focus. This is in anticipation of adding numeric text field entry for values. The problem is that there's no facility to send the keypress back to Reaper if the JSFX doesn't use it.
I can set this back to how it was. The downside is that if I add text field input in the future you'll never be able to enter SPACE. It'll start/stop playback rather than be entered in the text field.
|
|
|
06-11-2019, 04:39 AM
|
#405
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by lolgab
Hi and thank you for this fantastic plugin. I found a little bug: when you press "Listen" on a Low Cut Band with 6dB setting, pressing again doesn't remove the listen bandpass. As a workaround I now select another band and press listen two times to remove the listen mode.
|
Ooof! Good catch. I'll fix it.
|
|
|
06-11-2019, 05:03 AM
|
#406
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by DaveKeehl
Maybe add a button to renumber the nodes according to their frequency position? Especially because the arrows in the panel to switch node follow the numbering system, not the position (which could be annoying).
|
Yes, a node's number is its absolute identity. It's useful to know this index because only the first five nodes are automatable due to JSFX limitations. If a reorder was done it would change those first five around which could get really confusing. I'll give it some thought.
Quote:
Originally Posted by DaveKeehl
When the panel button is engaged there's no dB indication on the right below -18
|
Yes, by design and same as Pro-Q3 in this regard. When the panel is engaged the bottom part of the screen is reserved for panel control so priority is given to that. You can't control filter nodes beyond that lower dB point using the mouse either (clicking on the node places it back in the addressable dB range).
Quote:
Originally Posted by DaveKeehl
When the panel button is engaged, the panel is open and you click somewhere else the panel disappears (which is fine) but the gui does not reflect this new state.
|
Also by design and the same as Pro-Q3. The panel is a reflection of selected filter node state. It would be jarring if the filter dB range contracted and extended based on whether you had a filter node selected or not. The filter nodes and transfer curves would jolt up and down.
Quote:
Originally Posted by DaveKeehl
Could you please add a double click function to reset the frequency, gain and q-factor buttons in the panel?
|
You bet.
Quote:
Originally Posted by DaveKeehl
In the panel the red cross is a bit ambiguous... one could think it's used to closed the panel and not to delete the node (and ReEq doesn't have any undo points...)
|
I agree. Pro-Q3 uses the same visual language but I think it's a mistake. [X] visually really refers to closing a window, not deleting. I'll change it to 'DEL' or something.
Quote:
Originally Posted by DaveKeehl
Just my 2 cents other than that I like it a lot!
|
Thanks for the great feedback!
|
|
|
06-11-2019, 05:38 AM
|
#407
|
Human being with feelings
Join Date: Apr 2016
Posts: 50
|
Quote:
Originally Posted by nitsuj
I changed ReEQ so that it gets all keyboard input when it has focus.
|
Please back this process.
I would not want to lose this convenience, in work.
Quote:
Originally Posted by nitsuj
The downside is that if I add text field input in the future you'll never be able to enter SPACE.
|
That's all right, I am ready to go on such a small inconvenience.
By the way, an idea appeared, how to catch two rabbits...))
When will you add text field input in the future,
as an option, you can add a space key in the exception.
For example, the activation of a simple space will be carried out through alternative key combinations.
"ALT+Spacebar"; "CTR+Spacebar" or "SHIFT+Spacebar" (any combination choice).
How do you think, alternative combinations for spacebar can be implemented?
|
|
|
06-11-2019, 10:46 AM
|
#408
|
Human being with feelings
Join Date: Jan 2018
Location: Rochester, NY, USA
Posts: 97
|
Download location
I may be a little thick. I have an older version and would like to stay up to date but I can't find a download location.
Could someone humor me and point me to the right place?
Thanks much!
--Bill
|
|
|
06-11-2019, 10:49 AM
|
#409
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
I think it is in first post of this thread.
|
|
|
06-11-2019, 12:59 PM
|
#410
|
Human being with feelings
Join Date: Mar 2017
Location: France
Posts: 627
|
Quote:
Originally Posted by HDWind
Please back this process.
I would not want to lose this convenience, in work.
That's all right, I am ready to go on such a small inconvenience.
|
I have to check but I think there's in the pre release forum dev versions of reaper with hotkey override for any plugin. So that may be implemented soon enough...
|
|
|
06-11-2019, 01:37 PM
|
#411
|
Human being with feelings
Join Date: Apr 2018
Location: Karlsruhe
Posts: 486
|
I wanted to check out these two plugins, but sadly these are not working on my installation (Linux Debian Stretch / Native Linux Reaper). For both plugins I get a black screen with some text, but no spectrum. When I add the ReEQ also the sound goes away.
|
|
|
06-11-2019, 02:58 PM
|
#412
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by lilith93
I wanted to check out these two plugins, but sadly these are not working on my installation (Linux Debian Stretch / Native Linux Reaper). For both plugins I get a black screen with some text, but no spectrum. When I add the ReEQ also the sound goes away.
|
I think Reaper for Linux is still experimental. It looks like some of the drawing functions for JSFX haven't been implemented yet. I'd check back when new versions of Reaper are out.
|
|
|
06-11-2019, 09:57 PM
|
#413
|
Human being with feelings
Join Date: Nov 2007
Location: Tasmania
Posts: 87
|
I am really enjoying the new additions to the plugin.there is one small thing regarding presets,at the moment I have to manually change the Reaper preset file version number(js-ReJJ-1_0_4_ReEQ_jsfx)in order to see my presets from a previous in the dropdown preset list in the plugin window.Cheers.
|
|
|
06-12-2019, 03:34 AM
|
#414
|
Human being with feelings
Join Date: Jan 2018
Location: Rochester, NY, USA
Posts: 97
|
Quote:
Originally Posted by sinkmusic
I think it is in first post of this thread.
|
Why, yes it is. Thanks much!
--Bill
|
|
|
06-12-2019, 05:09 AM
|
#415
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
There's a new release up.
Changes are as follows:
ReEQ doesn't steal keyboard focus any more. SPACE now works again for playback.
Close [X] is now DELETE in the panel.
Fixed the 6db high/low pass filter bug.
Increase the dial values font size on the panel.
Altered the default window size.
Reaper notified when dials change.
CMD/Window key + double click now zeros values in the bottom row.
More additions features on the way...
|
|
|
06-12-2019, 06:41 AM
|
#416
|
Human being with feelings
Join Date: Feb 2008
Location: 6950 DK
Posts: 659
|
Quote:
Originally Posted by nitsuj
There's a new release up.
Changes are as follows:
ReEQ doesn't steal keyboard focus any more. SPACE now works again for playback.
Close [X] is now DELETE in the panel.
Fixed the 6db high/low pass filter bug.
Increase the dial values font size on the panel.
Altered the default window size.
Reaper notified when dials change.
CMD/Window key + double click now zeros values in the bottom row.
More additions features on the way...
|
Dude, how do we at least buy you a beer.?
__________________
REAPING HAVOC SINCE 2008
|
|
|
06-12-2019, 07:19 AM
|
#417
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by uksnowy
Dude, how do we at least buy you a beer.?
|
You're not the first person to have asked.
I do this to give to the community without any expectation of return. But...we're talking beer here and so who am I to deny the generosity of fellow Reaper users?
So...If you'd like to buy me a beer you can do so with the following link. Not mandatory at all but I'll toast you if you do.
https://www.paypal.me/nitsujdsp
|
|
|
06-13-2019, 03:06 AM
|
#418
|
Human being with feelings
Join Date: Feb 2008
Location: 6950 DK
Posts: 659
|
Quote:
Originally Posted by nitsuj
You're not the first person to have asked.
I do this to give to the community without any expectation of return. But...we're talking beer here and so who am I to deny the generosity of fellow Reaper users?
So...If you'd like to buy me a beer you can do so with the following link. Not mandatory at all but I'll toast you if you do.
https://www.paypal.me/nitsujdsp
|
Absolutely least I can do,. Thank you for the time and effort creating and supporting.
__________________
REAPING HAVOC SINCE 2008
|
|
|
06-14-2019, 01:54 PM
|
#419
|
Human being with feelings
Join Date: Apr 2018
Location: Karlsruhe
Posts: 486
|
Quote:
Originally Posted by JamesPeters
It works fine for me using MX Linux (and Reaper for Linux). Some more details of my system are in my signature.
|
That's really weird. I recently had a simlar problem with the saike analyzer.
|
|
|
06-14-2019, 02:18 PM
|
#420
|
Human being with feelings
Join Date: Apr 2018
Location: Karlsruhe
Posts: 486
|
Quote:
Originally Posted by nitsuj
I think Reaper for Linux is still experimental. It looks like some of the drawing functions for JSFX haven't been implemented yet. I'd check back when new versions of Reaper are out.
|
It seems to depend on the compositor I'm using, which is compton. I killed compton and then it worked and after starting compton again it still works.
edit: WOW... this EQ is awseome!!!! Really nice features!
Last edited by lilith93; 06-14-2019 at 02:35 PM.
|
|
|
06-14-2019, 11:20 PM
|
#421
|
Human being with feelings
Join Date: Aug 2018
Posts: 35
|
Any news if this will be included as a standard reaper plugin any time? That would be epic.
Awesome work!!
|
|
|
06-15-2019, 06:32 AM
|
#422
|
Human being with feelings
Join Date: Apr 2018
Location: Karlsruhe
Posts: 486
|
Quote:
Originally Posted by lilith93
It seems to depend on the compositor I'm using, which is compton. I killed compton and then it worked and after starting compton again it still works.
edit: WOW... this EQ is awseome!!!! Really nice features!
|
I rebooted and it is still working now. The solution was disable / kill compton once. Whatever that did .... (?)
|
|
|
06-15-2019, 06:42 AM
|
#423
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
On mac cmd + double click doesn't work. Also, when a node is selected when you click/unclick the panel button, that node should stay selected
|
|
|
06-15-2019, 11:29 AM
|
#424
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
oops sorry the reset feature was only for the bottom buttons, didn't read very carefull. Then it's fine
|
|
|
06-27-2019, 02:34 AM
|
#425
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
Posting to not let this thread sink
|
|
|
06-30-2019, 02:07 PM
|
#426
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by DaveKeehl
Posting to not let this thread sink
|
Thanks - still working on a few additions here. Work has just gotten busy so time permitting.
|
|
|
06-30-2019, 02:37 PM
|
#427
|
Human being with feelings
Join Date: Jun 2014
Posts: 10
|
Best EQ thanks Nitsuj!!
|
|
|
07-01-2019, 10:55 AM
|
#428
|
Human being with feelings
Join Date: May 2019
Posts: 8
|
Hey Nitsuj, thanks for all your hard work on this fantastic EQ!
I'm using the release from May 19th, and I've noticed that one instance of ReEQ takes 5 or 6 seconds to load per session.
This isn't much of an issue until I have 10 or more, which realy adds up. Is this normal? Are there any optimizations that could be done to make loading times faster? Or maybe It's dependant of my setup?
I run reaper from an SSD and the session files from a 7200 rpm HDD.
|
|
|
07-02-2019, 12:27 AM
|
#429
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by attreux
Hey Nitsuj, thanks for all your hard work on this fantastic EQ!
I'm using the release from May 19th, and I've noticed that one instance of ReEQ takes 5 or 6 seconds to load per session.
This isn't much of an issue until I have 10 or more, which realy adds up. Is this normal? Are there any optimizations that could be done to make loading times faster? Or maybe It's dependant of my setup?
I run reaper from an SSD and the session files from a 7200 rpm HDD.
|
Which version of Reaper are you running? There was some work done on Reaper which sped up loading JSFX considerably just after ReEQ released. On my machine it loads in a few ms.
|
|
|
07-02-2019, 11:12 AM
|
#430
|
Human being with feelings
Join Date: May 2019
Posts: 8
|
Quote:
Originally Posted by nitsuj
Which version of Reaper are you running? There was some work done on Reaper which sped up loading JSFX considerably just after ReEQ released. On my machine it loads in a few ms.
|
5.92
Do you happen to know the specific update that speeds this up?
|
|
|
07-02-2019, 12:36 PM
|
#431
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by attreux
5.92
Do you happen to know the specific update that speeds this up?
|
It was v5.965
JSFX: improve compilation speed of JSFX (2x-10x speedup observed for larger FX)
|
|
|
07-02-2019, 01:43 PM
|
#432
|
Human being with feelings
Join Date: May 2019
Posts: 8
|
Quote:
Originally Posted by nitsuj
It was v5.965
JSFX: improve compilation speed of JSFX (2x-10x speedup observed for larger FX)
|
Thanks a lot! I'm used to updates breaking things, so I've been sitting on that version for a while.
|
|
|
07-06-2019, 08:26 PM
|
#433
|
Human being with feelings
Join Date: Jul 2013
Location: Edmonton, Alberta, Canada
Posts: 258
|
Looking forward to getting updates by way of REAPACK
__________________
Ron L, i7 laptop x64, Win7pro/x64(dual boot), 7200rpm hd, 2 ext. hd, Scarlett 2i4, Event 20/20 audio monitors, 1 ext. video monitor, Novation Launch Control XL, REAPER x64, Sonar Platinum
|
|
|
07-07-2019, 09:39 AM
|
#434
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
still managed to got a track automuted while using ReEQ not sure what caused it though...
edit: I think it still has to do with the AGC function
Last edited by DaveKeehl; 07-07-2019 at 11:10 AM.
|
|
|
07-08-2019, 04:57 AM
|
#435
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by DaveKeehl
still managed to got a track automuted while using ReEQ not sure what caused it though...
edit: I think it still has to do with the AGC function
|
Gah! Can you reproduce it?
|
|
|
07-08-2019, 06:21 AM
|
#436
|
Human being with feelings
Join Date: Nov 2015
Location: Switzerland
Posts: 1,966
|
Quote:
Originally Posted by nitsuj
Gah! Can you reproduce it?
|
I can try. It seemed more random than usual 😬
|
|
|
07-18-2019, 02:15 AM
|
#437
|
Human being with feelings
Join Date: Aug 2018
Posts: 454
|
Hello,
Recently I'm found TDR Nova reports quite a PDC so looking for some general use comfy EQ. I remembered ReEQ from the past, so wanted to check it out, expecting is closer to final version
There are some findings, ideas from me:
1. While project is set to 48kHz, ReEQ running in HQ mode (I suppose x2 oversampling) still reports 480PDC per instance. Is oversampling still needed for 48KHz? I remember somewhere was stated that from this frequency oversampling is not used anymore. Or maybe it was above this freq?
2. Graph shows frequencies up to 22kHz even if project is set to 48Khz. I consider 22kHz as Niquist freq of 44.1kHz. So for 48 it should be 24. But maybe fixed limit is intentional.
3. While Low Pass filters have steepness rather than Q, please consider using Q wheel as steepness selector. Or make sure Q and Gain are disabled/grayed out when using filters that don't make use of them.
4. Would be nice to implement double-click for resetting values. OK, I found it work with key modified. wasn't it better without modifier??
5. I'm opting in for more slicky graph. It's not about aliasing, but it looks like build with quite long vectors.
6. A lot of users asked for more gfx options. I'm in I would like to see more color options. For example to change colours of pre-eq graph.
7. What about A/B comp?
8. more precise controls (knobs). Curently it's easier to set particular value on graph than using knobs. Maybe with help of some key-switch (I think ALT has such function in Reaper)
9. More ranges. Especially floor one at about 40dB (I used to 12dB/-48dB range in TDR Nova). As a completely beginner I'm not ready to track what happens near noise level
10. configurable speed of "gradual decay effect"
At the end I would like to thank you for this great EQ project. FabFilter-like display style is really very useful and intuitive
Found possible typo in features description in the first post:
Quote:
Press ALT or CMD (or WINDOWS) and double click on a value in the bottom row to reset the numeric values to default.
|
On Windows the mentioned modifier key is assigned to Control (CTRL).
As Windows I would never try Windows key for controlling an application, since the key has more "system" meaning"
With regards.
Last edited by MaXyM; 07-18-2019 at 07:13 AM.
|
|
|
07-18-2019, 09:30 AM
|
#438
|
Human being with feelings
Join Date: Nov 2017
Posts: 292
|
Quote:
Originally Posted by MaXyM
1. While project is set to 48kHz, ReEQ running in HQ mode (I suppose x2 oversampling) still reports 480PDC per instance. Is oversampling still needed for 48KHz? I remember somewhere was stated that from this frequency oversampling is not used anymore. Or maybe it was above this freq?
|
Yes, 48kHz in HQ will still use oversampling (so, 96kHz internally). Any sampling rate higher than that won't.
Quote:
Originally Posted by MaXyM
2. Graph shows frequencies up to 22kHz even if project is set to 48Khz. I consider 22kHz as Niquist freq of 44.1kHz. So for 48 it should be 24. But maybe fixed limit is intentional.
|
The fix is intentional. There has been a request to move the higher frequency up to 30kHz but under the current scheme it's not possible when the sample rate is 44.1kHz. I could increase the highest frequency but if you placed filters at that frequency I'd have to clamp them if you then reduced the sample rate. Still thinking about this one.
Quote:
Originally Posted by MaXyM
3. While Low Pass filters have steepness rather than Q, please consider using Q wheel as steepness selector. Or make sure Q and Gain are disabled/grayed out when using filters that don't make use of them.
|
It's the Butterworth filters that don't have Q settings. I'll give some thought to using the wheel for steepness for those filters.
Quote:
Originally Posted by MaXyM
4. Would be nice to implement double-click for resetting values. OK, I found it work with key modified. wasn't it better without modifier??
|
It was changed to using a modifier because double click is going to be used to bring up manual number entry. It's pretty standard.
Quote:
Originally Posted by MaXyM
5. I'm opting in for more slicky graph. It's not about aliasing, but it looks like build with quite long vectors.
|
Not sure what you mean here...JSFX is pretty limited and I'm already trying hard to make it look less..blocky.
Quote:
Originally Posted by MaXyM
6. A lot of users asked for more gfx options. I'm in I would like to see more color options. For example to change colours of pre-eq graph.
|
Will happen eventually.
Quote:
Originally Posted by MaXyM
7. What about A/B comp?
|
Probably will happen eventually.
Quote:
Originally Posted by MaXyM
8. more precise controls (knobs). Curently it's easier to set particular value on graph than using knobs. Maybe with help of some key-switch (I think ALT has such function in Reaper)
|
Yes, I could put in a fine-tuning key modifier.
Quote:
Originally Posted by MaXyM
9. More ranges. Especially floor one at about 40dB (I used to 12dB/-48dB range in TDR Nova). As a completely beginner I'm not ready to track what happens near noise level
|
I'll think about it. There's lots of audible signal at -40dB onwards. Pro Q2/3 defaults to -130dB, Equilibrium defaults to -80dB.
Quote:
Originally Posted by MaXyM
10. configurable speed of "gradual decay effect"
|
Yes, this'll go in eventually.
Dev is still on-going but has slowed a little due to work. Will be picking up the pace again soon so thanks for the great feedback!
|
|
|
07-19-2019, 01:45 AM
|
#439
|
Human being with feelings
Join Date: Aug 2018
Posts: 454
|
If I remove a band, existing bands are not re-enumerated. It's minor issue but I was scrapping my head a short while trying to figure out if a band number "2" is the only one or there is another one hidden somewhere.
Fortunately the plugin re-uses missing numbers when adding next bands (I've tested it trying to catch you )
Ahh.. I "accidentally" turned the scale to zero.
Next day I found this:
instead of this
You can imagine my puzzlement. Only LP filter was working. Other wasn't. And there was no graphical representation of bands. I was thinking it's plug-in bug initially.
Yea.. I admit it might be considered as my mistake.
But at first one working filter, while other not is really misleading.
Please consider adding some indicator, for example orange/red colour of scale value. To find the reason at first glance. even so I'm I will be remember next time why some of bands don't work
Quote:
Originally Posted by nitsuj
Not sure what you mean here...JSFX is pretty limited and I'm already trying hard to make it look less..blocky.
|
Yea.. probably we are talking about same things. Just to make sure:
|
|
|
07-19-2019, 02:44 AM
|
#440
|
Human being with feelings
Join Date: Oct 2009
Posts: 164
|
Nitsuj
1st thanks ever so much again for adding versioning to the files, something you graciously did a while ago. In recent times I had v 1.0.3 and I missed v1.0.4, so I now have v1.0.5 also.
You have done this very well, in both the directory naming and in the comments within each plugin (the EQ in particular). Absolutely excellent.
As a previous developer myself, I appreciate that progress sometimes comes with "challenges", and especially in what I would consider a rather Agile development process for these gifts to humanity, which do not have the privilege of a huge QA budget and extensive end-user beta testing, I accept that there may be a few regression issues, things that unintentionally slip in, which are then fixed in future versions.
I also realise that the audio portion of the code, not just the look and feel, may change over time, and should I have previous projects, I may want the audio to stay consistent with the version I used, for the project.
Here's what I have done, upon receipt of v1.0.5.
1. Ensured I keep each version in its own directory in Reaper's effects folder.
2. Modified the "desc" at the top of the .jsfx to include the version.
3. In my case I do this at install before using the plugin in any project...
4. Maintain a backup of these revised files/directories, in the event that I need to reinstall on a different computer or for recovery purposes
Result
This way, should there be any changes which I wish to preserve in my audio processing, I can always revert to an earlier version.
All in all, a minor installation overhead....
As always thanks for this superb plugin.... The new version is as some would say in the Afro American community in the USA, "dope" i.e very good stimulant...
Congratulations, and thanks always.....
I have one question though you indicate that the HQ mode adds some latency, but I do not find this reported by Reaper. when I change between the quality modes from Digital to HQ and back.. Please clarify why Reaper does not inform me of any change in PDC..
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 07:37 AM.
|