|
|
|
06-17-2010, 04:25 AM
|
#401
|
Human being with feelings
Join Date: Mar 2008
Location: Netherlands
Posts: 2,629
|
Quote:
Originally Posted by Peevy
While you do have a point here it can also be inspirational to play with a number of different synths
|
I do agree, but 'getting inspired' and 'producing a composition' have not been one and the same thing in my experience. I'm still looking back at my hardware days when I was so much more productive, both in quantity and in quality.
My last hardware setup consisted of a DX7, DX100, ESQ-1 and a K1rII. Those synths together covered such a wide sonic range that I didn't need anything else (the DX100 was simply expanding the FM-parts as those synths where mono-timbral). It also means I had such a deep understanding of these synths that I could get anything I wanted from them (withing their sonic range of course). I once had a discussion with Robert Jan Stips (of Supersister fame) who was demoing for PPG, that I could get a certain PPG-sound quite closely from a DX7. When I came home from the show I programmed it right away just to prove him wrong (he thought it couldn't be done), took me just about an hour to do it. I must add to this that I actually had formal training in FM-programming (loooooooong ago)
Back in those days I got inspiration from playing with synths I didn't own myself, in shops and on sales-shows. Then when I came back home it was fun AND instructional to try and get those sounds from my own gear.
I'm limiting myself because I really want to get that experience back
Quote:
Originally Posted by Peevy
Oh & since you quoted me slightly out of context earlier here it is right back at you with bells on.
|
Aaaaaahhh.... you will burn in hell for that one...
|
|
|
06-20-2010, 12:39 PM
|
#403
|
Human being with feelings
Join Date: Jul 2009
Posts: 7,595
|
I got Novation V-Station free after buying a Nocturn Keyboard and it's become one of my favorite synths, maybe tied with Z3ta+(PC only ) or Hybrid (PT only ).
Its a lot of fun to play once you've set up Automap with it.
If Z3TA+ is still $20 definitely grab that!
|
|
|
06-20-2010, 02:23 PM
|
#404
|
Human being with feelings
Join Date: May 2008
Location: Ireland
Posts: 552
|
Quote:
Originally Posted by mtsproductions
|
AAhhh....So you went for the Access Virus. I hope you enjoy your new toy. I've still got my mind set on the Woldorf Blofeld but I also have my eye on this:
Roland Gaia
Has anyone got this or tried it out yet?
__________________
System: Mobo-Asus Prime Z370P II, CPU-i7 8700K, RAM-64gb DDR4 3000mhz, GPU Nvidia 3060 OS: Manjaro Linux / Windows 11 / macos Soundcard: Motu 828ES Monitors: Adam A5X
|
|
|
06-20-2010, 03:04 PM
|
#405
|
Human being with feelings
Join Date: Mar 2008
Location: Netherlands
Posts: 2,629
|
Quote:
Originally Posted by Peevy
Has anyone got this or tried it out yet?
|
I've been looking to that one myself... but I try to resist the urge to get back into hardware synths. For now I have another new toy and it's a (of course free) VSTi, and it sounds totally amazing:
Definitely NOT an all-rounder (it's a physical modeling synthesizer) but very inexpensive (as in FREE!)
Grab it here: http://krakli.com/krakli-free-synths/
|
|
|
06-20-2010, 06:12 PM
|
#406
|
Human being with feelings
Join Date: Mar 2007
Location: Right between the resonance and the cutoff knob
Posts: 1,907
|
I tried some Krakli offerings around 4 years ago. If I recall correctly they were made with Synthedit and grossly inefficient with resource usage.
Have they improved in this area?
|
|
|
06-20-2010, 10:21 PM
|
#407
|
Human being with feelings
Join Date: Mar 2008
Location: Netherlands
Posts: 2,629
|
They are still a bit heavy on CPU load, but take into consideration that they are doing special things instead of 'simple' substractive synthesis. And there are several plugs that use quite a bit more CPU. RMXL uses about the same load as Tal Elec7ro, so I would say it's acceptable.
Because of the incredible sound of RMXL I can live with it
|
|
|
06-21-2010, 05:10 AM
|
#408
|
Human being with feelings
Join Date: Mar 2007
Location: Right between the resonance and the cutoff knob
Posts: 1,907
|
Quote:
Originally Posted by technogremlin
They are still a bit heavy on CPU load, but take into consideration that they are doing special things instead of 'simple' substractive synthesis. And there are several plugs that use quite a bit more CPU. RMXL uses about the same load as Tal Elec7ro, so I would say it's acceptable.
Because of the incredible sound of RMXL I can live with it
|
Well, it does sound like they have made tremendous strides in that regard and might be worth another look. Thanks for the info.
|
|
|
06-21-2010, 05:50 AM
|
#409
|
Human being with feelings
Join Date: Dec 2009
Location: Cinemaland
Posts: 1,377
|
Peevy:
I still got my mind set on the blofeld and i will be saving up for it
but i just couldnt pass on this deal and Iam glad i got it.
Right from the start when i first plugged the virus in i was impressed with the sound and iam not talking about the excitment over a new toy either this thing does not sound like a modeled digital synth it sounds more analog than anything i ever owned from yamaha to korg to roland even the simple saw patch sounds amazingly warm an lush.
I compared the saw patches with the virus and zeta+, you dont have to have years of ear training to hear the obvious difference.
Peevy:
I have played around on the roland GAIA SH-01 and its a fun synth pretty easy to tweak and straight forward. I would compare it to the mikrokorg as far as the sound goes minus the vocoder. Honestly I am not a fan of Roland synths I think they are overpriced but do sound good in most cases, having said that though you might want to take a look at the Roland V-synth the original, you can get one on ebay for the same price as the SH-01
|
|
|
06-21-2010, 12:20 PM
|
#410
|
Human being with feelings
Join Date: May 2008
Location: Ireland
Posts: 552
|
Quote:
Originally Posted by mtsproductions
Peevy:
I still got my mind set on the blofeld and i will be saving up for it
but i just couldnt pass on this deal and Iam glad i got it.
Right from the start when i first plugged the virus in i was impressed with the sound and iam not talking about the excitment over a new toy either this thing does not sound like a modeled digital synth it sounds more analog than anything i ever owned from yamaha to korg to roland even the simple saw patch sounds amazingly warm an lush.
I compared the saw patches with the virus and zeta+, you dont have to have years of ear training to hear the obvious difference.
Peevy:
I have played around on the roland GAIA SH-01 and its a fun synth pretty easy to tweak and straight forward. I would compare it to the mikrokorg as far as the sound goes minus the vocoder. Honestly I am not a fan of Roland synths I think they are overpriced but do sound good in most cases, having said that though you might want to take a look at the Roland V-synth the original, you can get one on ebay for the same price as the SH-01
|
I think the GAIA SH-01 seems like a really good synth, key features being:
*three virtual analogue engines onboard, each with a dedicated oscillator, filter, amplifier, envelope, and LFO
*Layer up to five simultaneous effects, including distortion, flanger, delay, reverb, low boost, and more
*64-voice polyphony
And the Optical D Beam that allows you to control pitch, modulation, Volume etc. with your hand like you would a theramin.
I still think I actually prefer the Waldorf Blofeld & its minimalist controls over the GAIA plus I think it might have the edge over the GAIA in sound quality & design as well.
I just thought I'd share my interest in the Roland GAIA here & see what some of you thought. Unfortunately as I stated before I don't have a half decent Music Store near by to check these synths out myself.
Quote:
Originally Posted by mtsproductions
Peevy:
I still got my mind set on the blofeld and i will be saving up for it
|
I'm hoping to have one for Christmas, I've already posted my list to Santa so....fingers crossed
__________________
System: Mobo-Asus Prime Z370P II, CPU-i7 8700K, RAM-64gb DDR4 3000mhz, GPU Nvidia 3060 OS: Manjaro Linux / Windows 11 / macos Soundcard: Motu 828ES Monitors: Adam A5X
|
|
|
06-21-2010, 12:49 PM
|
#411
|
Human being with feelings
Join Date: May 2008
Location: Ireland
Posts: 552
|
Waldorf Blofeld Buggy ??
One thing that worries me about the Waldorf Blofeld is I've read on a few sites that it can be a bit buggy at times. I don't know if this applies to the keyboard, desktop or both.
__________________
System: Mobo-Asus Prime Z370P II, CPU-i7 8700K, RAM-64gb DDR4 3000mhz, GPU Nvidia 3060 OS: Manjaro Linux / Windows 11 / macos Soundcard: Motu 828ES Monitors: Adam A5X
|
|
|
06-23-2010, 11:31 AM
|
#412
|
Human being with feelings
Join Date: May 2008
Location: Ireland
Posts: 552
|
AAS Tassman on Sale!
http://www.applied-acoustics.com/tassman/overview/
AAS are selling the modular Synth Tassman for $99 until the end of July. Its normally priced at $349 so I'd say this is a bargain.
I know zappadave from the forum here bought it recently & was very happy with it. I'm trying to fight the urge to check out the demo..... SYNTH OVERLOAD!!!..... MUST RESIST!!
__________________
System: Mobo-Asus Prime Z370P II, CPU-i7 8700K, RAM-64gb DDR4 3000mhz, GPU Nvidia 3060 OS: Manjaro Linux / Windows 11 / macos Soundcard: Motu 828ES Monitors: Adam A5X
|
|
|
06-23-2010, 11:40 AM
|
#413
|
Human being with feelings
Join Date: Mar 2007
Location: Right between the resonance and the cutoff knob
Posts: 1,907
|
Quote:
Originally Posted by Peevy
http://www.applied-acoustics.com/tassman/overview/
AAS are selling the modular Synth Tassman for $99 until the end of July. Its normally priced at $349 so I'd say this is a bargain.
I know zappadave from the forum here bought it recently & was very happy with it. I'm trying to fight the urge to check out the demo..... SYNTH OVERLOAD!!!..... MUST RESIST!!
|
AAS are some world-class douche bags to deal with. The C & R response system they use is antiquidated at best. I dropped them like a bad habit and have not looked back.
|
|
|
08-06-2010, 11:54 PM
|
#414
|
Human being with feelings
Join Date: Aug 2010
Posts: 1
|
Quote:
Originally Posted by mtsproductions
|
Nice synth indeed! Very little programming/tweaking needed to get freaked out sounds.
Included presets are very good too imo.
Cheers
Conrico
|
|
|
09-15-2010, 10:54 AM
|
#415
|
Human being with feelings
Join Date: Dec 2009
Location: Cinemaland
Posts: 1,377
|
bumpppage
Curious if there are any Reaktor pro users here, this thing is way too complicated for me, maybee some tutorials?
Evil Dragon?
techno gremlin?
pevey?
|
|
|
09-15-2010, 10:57 AM
|
#416
|
Human being with feelings
Join Date: Mar 2008
Location: Netherlands
Posts: 2,629
|
Quote:
Originally Posted by mtsproductions
techno gremlin?
|
Nope, I'm only doing freeware so no Reaktor here
|
|
|
09-15-2010, 11:07 AM
|
#417
|
Human being with feelings
Join Date: Dec 2009
Location: Cinemaland
Posts: 1,377
|
Quote:
Originally Posted by technogremlin
Nope, I'm only doing freeware so no Reaktor here
|
sheesh you and your freeware that does nothing for me!! thanks for the "nothing"
|
|
|
09-15-2010, 11:20 AM
|
#418
|
Human being with feelings
Join Date: Mar 2008
Location: Netherlands
Posts: 2,629
|
Quote:
Originally Posted by mtsproductions
sheesh you and your freeware that does nothing for me!! thanks for the "nothing"
|
Oh, but you are very welcome
Seriously though, I have official licenses for quite a bit of commercial gear (several bought and a pile of NFR licenses for beta-testing and writing professional reviews over the years) but never got my hands on Reaktor. I did have a payed of Sync Modular, the big competitor of Reaktor until Dr. Sync was hired by NI. Sync Modular is of course now freeware
As Sync Modular is 'kinda' like Reaktor I can say this: the real power in using such a system is in going deep. There is where something like Reaktor really shines, doing things that a 'normal' synth can't do. The only other thing is to load up pre-made ensembles and (to me) that is pretty much the same as loading up VSTi-instruments.
|
|
|
09-15-2010, 11:43 AM
|
#419
|
Human being with feelings
Join Date: Dec 2009
Location: Cinemaland
Posts: 1,377
|
well something weired is going on i can load prism into it and go through the presets but loading an ensemble wont produce any sound, i guess i just hafta dig into to the manual..
|
|
|
09-04-2012, 07:15 AM
|
#420
|
Human being with feelings
Join Date: Sep 2012
Location: Canada
Posts: 215
|
Quote:
Originally Posted by obijohn
|
Thumbs up for Sylenth.
|
|
|
09-04-2012, 05:56 PM
|
#421
|
Human being with feelings
Join Date: Jul 2010
Posts: 1,268
|
IMO, Zebra is the way to go. I wouldn't judge it based on an hour or two or even a day demoing it. It's such a deep synth and something you can grow into. I mean what CAN'T it do? Also, for all it's complicated depth it makes it really easy to do certain things. For instance, you can detune up to 11 waves with only one OSC! You don't even need to patch in another oscillator. I think the sound quality is top notch, but maybe that's just me.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 04:08 AM.
|