LCS_Custom-R6 :: includes 100%, 150% & 200% layouts

lucas_LCS · 06-28-2020, 10:30 PM

Available on Stash: LCS_Custom-R6

DESCRIPTION:
Default 6 with the buttons from White Tie's Modders Pack along with the meterbridge layouts from LCS_Flat-6_MBE.
The theme is currently based on the default theme from Reaper v6.57

----------------------
New Features & changes from the previous version:

Includes 150% and 200% sizes for all layouts
MCP Folder Indent and Align Controls is now available on all layouts
2 new MCP MASTER layouts with meters larger than the default layout.
Additional TCP layout that has the Phase button repositioned next to the Volume control so it's accessible in most states
Works with the Default Theme Adjuster

----------------------
INSTRUCTIONS:
unpack the zip file and copy the 'LCS_Custom-R6.ReaperThemeZip' file in your 'Reaper/ColorThemes' folder

This Theme uses the Default Theme Adjuster.

----------------------
ADDITIONAL LAYOUTS:

TCP: PHASE END OF LABEL: . . . . TCP layout with the Phase button located at the end of the track label next to Volume knob or fader.
MCP: METER BRIDGE: . . . . . . . . . full size Top Meter bridge layout from LC_Flat-6_MBE
MCP: METER NARROW MBRIDGE: . narrow Top Meter bridge layout from LC_Flat-6_MBE
MCP: METER STRIP MBRIDGE: . . . strip Top Meter bridge layout from LC_Flat-6_MBE
MCP: MASTER MORE METER: . . . . Volume fader has been moved to the right underneath the IO button to accommodate a wider meter.
MCP: MASTER WIDE METER: . . . . Volume changed to a knob and placed along with all buttons above the meter to allow for an even wider meter.
SEPARATORS: .. . . . . . . . . . . . . 3 for the MCP and 1 for the TCP

PLEASE NOTE:
1: All Meter Bridge layouts use the same Theme Adjuster settings as their respective A, B or C layouts.
2: All Meter Bridge layouts have the following Theme Adjuster settings disabled:

Narrow Mode
Labels Mode
MeterExpansion Mode

These modes break the layouts due to the position of the meter.

----------------------
UPDATE: 08/18/2022
- fixed graphic issue with TCP Recarm button

MAJOR UPDATE: 07/30/2022

This theme is now based on the default theme from Reaper v6.57
Theme now includes 150% and 200% sizes for all layouts
MCP Folder indent and Control aligment now available on all layouts
Additional TCP layout that has the Phase button repositioned next to the Volume control so it's accessible in most states
2 additional MCP Master layouts with larger meter than the default
Theme now works with the Default Theme Adjuster

------------------------
UPDATE: 10/01/2020
- added new TCP FX & send images

UPDATE: 07/02/2020
- fixed sync mode for transport Play buttons
- fixed item and loop modes for transport recarm button
- changed transport buttons to be 'out' with shadow instead of 'pushed in' with highlight.
- setup new RTConfig based on default 6 from Reaper v6.12c
- setup custom Theme Adjuster

::

lucas_LCS · 06-28-2020, 10:30 PM

DEFAULT LAYOUTS

100%

150%

200%

TCP LAYOUTS: 100%, 15%0 & 200%

MCP METER BRIDGE: MAIN, NARROW & STRIPS LAYOUTS

100%

150%

200%

::

lucas_LCS · 06-28-2020, 10:31 PM

MCP MASTER LAYOUTS

--- DEFAULT --- -- MORE METER -- --- WIDE METER --

::

lucas_LCS · 06-28-2020, 10:31 PM

reserved for future use

::

VVV · 06-29-2020, 08:36 AM

great theme.

I put the theme adjuster lua and folder in script folder but it s not working, any idea?

lucas_LCS · 06-29-2020, 12:45 PM

Quote:

Originally Posted by VVV

great theme.

Thanks!

Quote:

Originally Posted by VVV

I put the theme adjuster lua and folder in script folder but it s not working, any idea?

I am unable to replicate the issues.
Please let me know what the error message is saying.

::

Retro · 06-29-2020, 02:20 PM

Nice work. You are a theme producing machine!

VVV · 06-30-2020, 07:31 AM

Quote:

Originally Posted by lucas_LCS

Thanks!

I am unable to replicate the issues.
Please let me know what the error message is saying.

::

The transport buttons can't be resized but maybe this is normal?

lucas_LCS · 06-30-2020, 07:58 AM

@ Retro

this one didn't take long since it was mostly an image replacement using existing images and tweaking code I had already written.

::

lucas_LCS · 06-30-2020, 08:04 AM

UPDATE: 07/30/2022
The 150% and 200% layout sizes are now available as 07/30/2022
The following Quotes and Response are no longer accurate.
-------------------------------------------------------

Quote:

Originally Posted by VVV

The transport button can't be reszed but maybe this is normal?

If you are referring to the 100%/150%/200% sizes in the theme adjuster, then yes, this is expected.
Those layout sizes and images have been removed as per the notice in the first post:

Quote:

Originally Posted by lucas_LCS

....

----------------------
PLEASE NOTE:The Mods are only for the 100% version.
The 150 and 200 size layouts have been removed.
----------------------

...

::

VVV · 06-30-2020, 08:13 AM

Quote:

Originally Posted by lucas_LCS

If you are referring to the 100%/150%/200% sizes in the theme adjuster, then yes, this is expected.
Those layout sizes and images have been removed as per the notice in the first post:

::

Oops didn't read that, my bad!

lucas_LCS · 07-02-2020, 01:00 AM

UPDATE: 07/02/2020

Available on Stash: LCS_Custom-R6

NOTE: Theme and custom Theme Adjuster are now based on the default theme from Reaper v6.12c

DETAILS:
- fixed sync mode for transport Play buttons
- fixed item and loop modes for transport recarm button
- changed transport buttons to be 'out' with shadow instead of 'pushed in' with highlight.
- setup new RTConfig based on default 6 from Reaper v6.12c
- setup custom Theme Adjusterbased on default 6 from Reaper v6.12c

::

lucas_LCS · 10-01-2020, 05:09 AM

UPDATE: 10/01/2020
- added new TCP FX & send images

Get it from Stash

::

EduSerra · 05-25-2022, 03:17 PM

Hi Lucas. I´m the forum memeber that requested this mod a couple of years ago. I´ve been tweaking again this theme. I wan´t to ask you if it´s possible to fix the indent and alignment of the bridged layouts in the MCP, please.

This Default 6 theme mod is great and it would be really nice if you can update it.

Thanks a lot.

Ed.

lucas_LCS · 05-25-2022, 08:46 PM

Quote:

Originally Posted by EduSerra

Hi Lucas. I´m the forum memeber that requested this mod a couple of years ago. I´ve been tweaking again this theme. I wan´t to ask you if it´s possible to fix the indent and alignment of the bridged layouts in the MCP, please.

This Default 6 theme mod is great and it would be really nice if you can update it.

Thanks a lot.

Ed.

Hi,

I'm currently rebuilding the Flat-6_MBE (Meter Bridge Edition) and the MCP Folder Indent is one of the items I will be looking to add.
If I can get it worked out, I'll add it to this theme as well.

::

EduSerra · 05-26-2022, 06:47 AM

Quote:

Originally Posted by lucas_LCS

Hi,

I'm currently rebuilding the Flat-6_MBE (Meter Bridge Edition) and the MCP Folder Indent is one of the items I will be looking to add.
If I can get it worked out, I'll add it to this theme as well.

::

That´s great Lucas, thank you very much.

lucas_LCS · 06-20-2022, 09:04 PM

I think I've got it worked out in the LCS_Flat-6_MBE theme, so I should be able to get it working in this theme as well.
I need to make some updates the main Flat-6 theme when I've finished with the MBE updates, so it will be a while before I can get to the Custom-6 theme.
I can take a look at the track label colors at that time as well.

::

lucas_LCS · 07-30-2022, 08:19 AM

Available on Stash: LCS_Custom-R6

New Features & changes from the previous version:

The theme is now based on the default theme from Reaper v6.57
Theme now includes 150% and 200% sizes for all layouts
MCP Folder indent and Control aligment now available on all layouts
Additional TCP layout that has the Phase button repositioned next to the Volume control so it's accessible in most states
2 additional MCP Master layouts with larger meter than the default
Theme now works with the Default Theme Adjuster

::