|
|
|
11-09-2016, 07:36 AM
|
#921
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by daxliniere
Man, this is CLEVER!
|
i sign it !
|
|
|
11-09-2016, 07:52 AM
|
#922
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
uhmm..
this might be a stupid thing to put into words.. i just couldn't resist...
there might be two list for the Track Parameters/Track Controls?
we can see Record Arm in the Stripper's list
but Reaper doesn't show (give access to) Rec Arm in the Envelope list...
just thinking out loud
|
|
|
11-09-2016, 08:24 AM
|
#923
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
uhmm..
this might be a stupid thing to put into words.. i just couldn't resist...
there might be two list for the Track Parameters/Track Controls?
we can see Record Arm in the Stripper's list
but Reaper doesn't show (give access to) Rec Arm in the Envelope list...
just thinking out loud
|
Well - I have sends working by using an alternative API call to set and get the values.
But not yet found solution for track parameters Vol etc...
|
|
|
11-09-2016, 12:24 PM
|
#924
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
uhmm..
this might be a stupid thing to put into words.. i just couldn't resist...
there might be two list for the Track Parameters/Track Controls?
we can see Record Arm in the Stripper's list
but Reaper doesn't show (give access to) Rec Arm in the Envelope list...
just thinking out loud
|
Unfortunately - I cannot find any way to record the automation from the track controls (volume/pan/solo/mute etc).
The sends have an alternative API - SetTrackSendUIVol and SetTrackSendUIPan. Note - no mute UI API though - but you could fake this using a memory button and the volume parameter call.
But there is no alternative for the track volume/pan etc. If you want to automate these - as far as I can tell (and I've combed the entire API looking) there is no way to alter the track controls themselves that can be recorded as automation.
I guess a feature request could be made to add UI versions for the track controls - would be nice for general completeness of the API.
You can certainly get round it by having a Volume/Pan etc trim plugin - and placing in a parent folder for the one you want to automate. This should allow you to drag the volume of the parent folder completely down (using the automated trim plugin) but still have pre-fader fx sends working on the child track if that's what you need...
|
|
|
11-09-2016, 03:07 PM
|
#925
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Unfortunately - I cannot find any way to record the automation from the track controls (volume/pan/solo/mute etc).
The sends have an alternative API - SetTrackSendUIVol and SetTrackSendUIPan. Note - no mute UI API though - but you could fake this using a memory button and the volume parameter call.
But there is no alternative for the track volume/pan etc. If you want to automate these - as far as I can tell (and I've combed the entire API looking) there is no way to alter the track controls themselves that can be recorded as automation.
I guess a feature request could be made to add UI versions for the track controls - would be nice for general completeness of the API.
You can certainly get round it by having a Volume/Pan etc trim plugin - and placing in a parent folder for the one you want to automate. This should allow you to drag the volume of the parent folder completely down (using the automated trim plugin) but still have pre-fader fx sends working on the child track if that's what you need...
|
actually Track Solo and Mute is very important to have in the Stripper,
but only when the trying/tweaking parameters and listening the channels so not for the automation..
also i can use easily a workaround for the mutes as you described...
summarize: if the Send levels OK, i am happy too, more than enough!
|
|
|
11-09-2016, 04:56 PM
|
#926
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
actually Track Solo and Mute is very important to have in the Stripper,
but only when the trying/tweaking parameters and listening the channels so not for the automation..
also i can use easily a workaround for the mutes as you described...
summarize: if the Send levels OK, i am happy too, more than enough!
|
Yep - the send volumes and pans are automating fine here
will update probably tomorrow along with the first snapshots (I have them working - but not saving yet). So far only page snapshots - so all controls on a page...
|
|
|
11-09-2016, 05:11 PM
|
#927
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Yep - the send volumes and pans are automating fine here
will update probably tomorrow along with the first snapshots (I have them working - but not saving yet). So far only page snapshots - so all controls on a page...
|
thats great news to me!
|
|
|
11-10-2016, 01:54 PM
|
#928
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Update - added page snapshots. These are quite raw at the moment - lots of plans to improve.
I plan to add subset snapshots soon - but in doing so there's a chance I could break compatibility with current snapshots - although I have thought ahead and will try my best not to break any you make with the current system.
If you plan to record automation with switching the snapshot settings - it kind of does a swift fade between settings rather than hard cut - I can only think this is to do with the shape of the envelope points it creates whilst recording automation. If you want something sharper - you may need to manually edit the points to make them square type instant changes...
I really want to add the Action buttons soon - because that should open up all sorts of possibilities - so it is on my mind - by snapshots first...
Let me know how they work for you - or any things to improve - currently I've set it to double-click on them to switch between snapshots - but I think single-clicking would be better if used in a live situation.
I've also not tested with huge sets of parameters - looking at you Timbralzoom! - so would be good to know how swift the switching is.
I also plan to add snapshot display controls to sit on the grid - which when clicked on will open the snapshots window showing the correct snapshot sets... But haven't got this far yet.
|
|
|
11-10-2016, 02:08 PM
|
#929
|
Petit manitou
Join Date: Feb 2009
Location: Mars
Posts: 7,356
|
Quote:
Originally Posted by lb0
Update - added page snapshots. These are quite raw at the moment - lots of plans to improve.
I plan to add subset snapshots soon - but in doing so there's a chance I could break compatibility with current snapshots - although I have thought ahead and will try my best not to break any you make with the current system.
If you plan to record automation with switching the snapshot settings - it kind of does a swift fade between settings rather than hard cut - I can only think this is to do with the shape of the envelope points it creates whilst recording automation. If you want something sharper - you may need to manually edit the points to make them square type instant changes...
I really want to add the Action buttons soon - because that should open up all sorts of possibilities - so it is on my mind - by snapshots first...
Let me know how they work for you - or any things to improve - currently I've set it to double-click on them to switch between snapshots - but I think single-clicking would be better if used in a live situation.
I've also not tested with huge sets of parameters - looking at you Timbralzoom! - so would be good to know how swift the switching is.
I also plan to add snapshot display controls to sit on the grid - which when clicked on will open the snapshots window showing the correct snapshot sets... But haven't got this far yet.
|
Thank you Leon ! It's an incredible work !! Génial !
|
|
|
11-10-2016, 02:10 PM
|
#930
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
fast one
got this when click to CAPTURE instantly
...AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
now i am going try with the giant one
edit...
same:
Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
now ill test in an empty project via building a simple strip.
last edit..
same message with a simple rea EQ 3 parameters
\AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
|
|
|
11-10-2016, 02:17 PM
|
#931
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
fast one
got this when click to CAPTURE instantly
...AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
now i am going try with the giant one
edit...
same:
Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
now ill test in an empty project via building a simple strip.
last edit..
same message with a simple rea EQ 3 parameters
\AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10660: attempt to concatenate a nil value (global 'snapcnt')
|
Aaarghhh... my fault completely (well who else's would it be!) Sorry - I changed a variable name last minute to make more sense in the context and missed one... update ready and published...
|
|
|
11-10-2016, 02:31 PM
|
#932
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Aaarghhh... my fault completely (well who else's would it be!) Sorry - I changed a variable name last minute to make more sense in the context and missed one... update ready and published...
|
hmm.. github says one hour ago
|
|
|
11-10-2016, 02:33 PM
|
#933
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
hmm.. github says one hour ago
|
16 minutes on mine... strange.
anyway - if you like go to line 10660 - change snapcnt to snappos.
EDIT - tried to upload again - but it insists it's the same file, I've checked it and is the correct one
|
|
|
11-10-2016, 02:36 PM
|
#934
|
Human being with feelings
Join Date: Jun 2015
Posts: 685
|
When trying to save a snapshot:
Code:
LBX Stripper.lua:10645: attempt to index a nil value (field '?')
EDIT: Wait, now it seems to work! Wow this is really nice... I get to remix every track at least 3 times, trying to decide which one is best!
Hey, I'll drop a couple requests here if you don't mind:
- closing message boxes with enter
- quick insert strips. ability to set one as a default preset, that you can insert by clicking on a button on the top menu bar maybe? (maybe also a double-click to insert for the left hand side strip list?). little conveniences...
thanks
PPS. would it be difficult to pass through keystrokes to Reaper, when a text box is not in use?
Last edited by Sju; 11-10-2016 at 02:42 PM.
|
|
|
11-10-2016, 02:40 PM
|
#935
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by Sju
When trying to save a snapshot:
Code:
LBX Stripper.lua:10645: attempt to index a nil value (field '?')
EDIT: Wait, now it seems to work! Wow this is really nice... I get to remix every track at least 3 times, trying to decide which one is best!
|
Still a bit puzzled by the original crash - could you provide me with any extra details. Was it a blank project, how many tracks, any controls on the page etc.
Thanks,
Ah - I've repeated on a master only project - will fix
|
|
|
11-10-2016, 02:48 PM
|
#936
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by Sju
When trying to save a snapshot:
Code:
LBX Stripper.lua:10645: attempt to index a nil value (field '?')
EDIT: Wait, now it seems to work! Wow this is really nice... I get to remix every track at least 3 times, trying to decide which one is best!
Hey, I'll drop a couple requests here if you don't mind:
- closing message boxes with enter
- quick insert strips. ability to set one as a default preset, that you can insert by clicking on a button on the top menu bar maybe? (maybe also a double-click to insert for the left hand side strip list?). little conveniences...
thanks
PPS. would it be difficult to pass through keystrokes to Reaper, when a text box is not in use?
|
Original error I think is fixed now - hopefully.
Regarding you requests - first two I can do when I have some time.
the PPS - not sure if this is possible - will look into though.
|
|
|
11-10-2016, 03:31 PM
|
#937
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
|
|
|
11-10-2016, 03:37 PM
|
#938
|
Human being with feelings
Join Date: Jun 2015
Posts: 685
|
Quote:
Originally Posted by lb0
Original error I think is fixed now - hopefully.
Regarding you requests - first two I can do when I have some time.
the PPS - not sure if this is possible - will look into though.
|
Thanks! yeah it was a quite big strip with lots of controls, cycle buttons etc. Strange that it only happened that one time and then it worked. Good that you found the culprit. Thanks for considering the FRs!
|
|
|
11-10-2016, 03:38 PM
|
#939
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
|
Ok - seems double-click times out a lot for you as you have a lot going on - might make it single-click in next version...
|
|
|
11-10-2016, 03:54 PM
|
#940
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by Sju
Thanks! yeah it was a quite big strip with lots of controls, cycle buttons etc. Strange that it only happened that one time and then it worked. Good that you found the culprit. Thanks for considering the FRs!
|
New update
Enter to close message box
Right-click on saved strip in list to set as default. Then insert into empty strip page via main ... menu. Can be inserted whilst in any mode (I think)
Finally - single click to change snapshot. double-click was a bit temperamental!
Let me know of any problems.
|
|
|
11-10-2016, 03:58 PM
|
#941
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
|
Nice - I hope to be able to speed up transitions too (at least a bit). At the moment it's storing the normalized parameter values - whereas if I store the denormalized ones - I will have to do way less processing to reinstate a parameter...
But - this change will break any stored snapshots! :/
|
|
|
11-10-2016, 03:59 PM
|
#942
|
Petit manitou
Join Date: Feb 2009
Location: Mars
Posts: 7,356
|
oups
Code:
...cent\AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10342: attempt to index a nil value (global 'strip_default')
it is when I want get out of the edit mode.
The snapshop is .... enorme !
Code:
...cent\AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10342: attempt to index a nil value (global 'strip_default')
when get out of the setting window
edit. I re-Update just now and seems work normaly
Last edited by Vincent Sermonne; 11-10-2016 at 04:15 PM.
|
|
|
11-10-2016, 04:02 PM
|
#943
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by Vincent Sermonne
Code:
...cent\AppData\Roaming\REAPER\Scripts\LBX\LBX Stripper.lua:10342: attempt to index a nil value (global 'strip_default')
|
Sorry - fixed. I hate working with global external states - cos once I've set them - It's very hard to test what might happen if they aren't there!! (without spending more time removing them first).
|
|
|
11-10-2016, 04:52 PM
|
#944
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Nice - I hope to be able to speed up transitions too (at least a bit). At the moment it's storing the normalized parameter values - whereas if I store the denormalized ones - I will have to do way less processing to reinstate a parameter...
But - this change will break any stored snapshots! :/
|
Thanks,
no problem we are still just testing... and i am keeping all scripts that i used,
with the tags in the names
so you can do/change as you want to, what will improve, will make better this beauty!
ill be OK with them.
-would be great if we can resize Snapshot window vertically
i have more to suggest but ...step by step
now going to test new one click version.
Thank you so much!
|
|
|
11-10-2016, 05:01 PM
|
#945
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
Thanks,
no problem we are still just testing... and i am keeping all scripts that i used,
with the tags in the names
so you can do/change as you want to, what will improve, will make better this beauty!
ill be OK with them.
-would be great if we can resize Snapshot window vertically
i have more to suggest but ...step by step
now going to test new one click version.
Thank you so much!
|
Yeah - was going to add resize of snapshot window. Have you found that you can rename/delete/overwrite snapshots using right-click menu?
|
|
|
11-10-2016, 05:40 PM
|
#946
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Yeah - was going to add resize of snapshot window. Have you found that you can rename/delete/overwrite snapshots using right-click menu?
|
i found every Easter Eggs!
just was obsessively busy to mess with parameters of the giant template and save/load
snapshots just can't stop to post...
Rename + overwrite was must have ones!
Thank you! one by one for all of them
just a "just in case wish" please no not include plugin guis / positions etc.
never to the Snapshots... well... if it will be suggested / requested
please make it optional! this is also important in my humble opinion.
one more about the list would useful to have mouse wheel scroll up down...
also maybe a slide bar in the the future versions or final version..
..
now i see i miss the Save not possible yet part
but no problem nothing can kill my happiness tonight!
edit..
as i said nothing
https://www.youtube.com/watch?v=4nMivo9G1oc
Last edited by timbralzoom; 11-10-2016 at 06:00 PM.
|
|
|
11-10-2016, 06:20 PM
|
#947
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
i found every Easter Eggs!
just was obsessively busy to mess with parameters of the giant template and save/load
snapshots just can't stop to post...
Rename + overwrite was must have ones!
Thank you! one by one for all of them
just a "just in case wish" please no not include plugin guis / positions etc.
never to the Snapshots... well... if it will be suggested / requested
please make it optional! this is also important in my humble opinion.
one more about the list would useful to have mouse wheel scroll up down...
also maybe a slide bar in the the future versions or final version..
..
now i see i miss the Save not possible yet part
but no problem nothing can kill my happiness tonight!
edit..
as i said nothing
https://www.youtube.com/watch?v=4nMivo9G1oc
|
Resize is now there - but won't remember after closing the project yet.
mouse wheel was there all along - but if you moved the window it stopped working - oops - fixed now
Noted about your do not include requests or at least make optional. I had no plans along those lines anyway.
It should save the snapshots ok with the project - please let me know if it doesn't...
|
|
|
11-10-2016, 07:01 PM
|
#948
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Resize is now there - but won't remember after closing the project yet.
mouse wheel was there all along - but if you moved the window it stopped working - oops - fixed now
Noted about your do not include requests or at least make optional. I had no plans along those lines anyway.
It should save the snapshots ok with the project - please let me know if it doesn't...
|
Thanks!
ill test in a moment!!
one more.. seems really useful to me:
to tell some of the parameters do not include to snapshot
or another word.. exclude from snapshots in the right click menu would be great...
as an example i would use this for all vu meters.
(anyway probably they will be recorded when i use action
"write current values in time selection" but no need them in snapshots)
snapshots to project example
it takes a little time to load because of this giant envelope list but it works
https://www.youtube.com/watch?v=sNCLrXS7q78
|
|
|
11-10-2016, 07:37 PM
|
#949
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
latest one...
mouse wheel works great!
save with project didn't work to me.
edit for thinking out loud moment...
i have no idea how to describe this but ill try,
is it possible to have an option/command to tell to all parameters (kind a) "send ping" to the automation/envelopes..
just for inform (record of course) their current values at once?
sounds a bit crazy even to me but might be useful activate all envelopes via one click when you start to record Snapshots in to project.
edit2...for saying "Great!" to the:
"I had no plans along those lines anyway"
final of the night..
if you use mouse wheel on empty snapshot list
Scripts\LBX\LBX Stripper.lua:7132: attempt to index a nil value (global 'snapshots')
as a side note..
if make sense: after creating one snapshot and delete, mouse wheel doesn't crash anymore.
Last edited by timbralzoom; 11-10-2016 at 08:33 PM.
|
|
|
11-11-2016, 01:13 AM
|
#950
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
latest one...
mouse wheel works great!
save with project didn't work to me.
edit for thinking out loud moment...
i have no idea how to describe this but ill try,
is it possible to have an option/command to tell to all parameters (kind a) "send ping" to the automation/envelopes..
just for inform (record of course) their current values at once?
sounds a bit crazy even to me but might be useful activate all envelopes via one click when you start to record Snapshots in to project.
edit2...for saying "Great!" to the:
"I had no plans along those lines anyway"
final of the night..
if you use mouse wheel on empty snapshot list
Scripts\LBX\LBX Stripper.lua:7132: attempt to index a nil value (global 'snapshots')
as a side note..
if make sense: after creating one snapshot and delete, mouse wheel doesn't crash anymore.
|
Thanks for the error reports.
Strange - it should save the snapshots - and reload when you reopen the project. Any chance you can look in the .rpp file and see if there are any entried that look like:
SNAP_STRIP_1_1_SSTYPE_COUNT 1
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_CID 1646526463
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_CTL 10
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_VAL 0.25
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_11_CID 694550527
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_11_CTL 11
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_11_VAL 0.25
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_12_CID 4155113471
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_12_CTL 12
then I'll have an idea as to if the saving or loading is failing for you.
Make sure you create some snapshots first - save the project. Then open the .rpp file in something like notepad/notepad++,
Do not load the project file again before you check the .rpp file or it will wipe the snapshots when closing if they failed to load...
thanks...
|
|
|
11-11-2016, 01:48 AM
|
#951
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
latest one...
mouse wheel works great!
save with project didn't work to me.
edit for thinking out loud moment...
i have no idea how to describe this but ill try,
is it possible to have an option/command to tell to all parameters (kind a) "send ping" to the automation/envelopes..
just for inform (record of course) their current values at once?
sounds a bit crazy even to me but might be useful activate all envelopes via one click when you start to record Snapshots in to project.
edit2...for saying "Great!" to the:
"I had no plans along those lines anyway"
final of the night..
if you use mouse wheel on empty snapshot list
Scripts\LBX\LBX Stripper.lua:7132: attempt to index a nil value (global 'snapshots')
as a side note..
if make sense: after creating one snapshot and delete, mouse wheel doesn't crash anymore.
|
Yes - I can possibly add a function to open all envelope lanes - will think on best way to do this... Pretty sure I did something like this on Chaos Engine script.
Important thing to look for - I need to know if your CID values are saving in the project - this would mean any snapshots may not be recalled properly.
I added the CID value to keep track of if you delete any controls - so the snapshots can be appropriately updated - but these would not be in your old project (although I thought I would have had them added if they were missing - maybe that bits not working).
can you please check for CID values in the project file: like:
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_CID 1646526463
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_CTL 10
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_10_VAL 0.25
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_11_CID 694550527
SNAP_STRIP_1_1_TYPE_1_SNAPSHOT_10_DATA_11_CTL 11
Thanks again.
EDIT: Well the CID's generate ok for me on an old project - so might not be that... hmmm...
Last edited by lb0; 11-11-2016 at 02:04 AM.
|
|
|
11-11-2016, 03:26 AM
|
#952
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Minor update:
Snapshots will now store and recall denormalized parameter values for a little extra speed.
This will stop currently saved snapshots from yesterday not work - sorry!
Edit: Anyone else having trouble with saved snapshots? As in - are they still in the project after closing the script window and reopening? Or have they disappeared?
Last edited by lb0; 11-11-2016 at 03:32 AM.
|
|
|
11-11-2016, 03:53 AM
|
#953
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Hi,
strange thing i was able to save once
i do not now the how to reproduce but...
first search didn't find the lines..
while project open in notepad++, i changed added snapshots and saved in the reaper,
notepad++ asked "file changed to re open it?" i said yes and data was there...
after save i close reaper and reopen the project snapshots was there also..
now project opens snapshots
but no matter what i tried i cannot save from scratch or can't add new snapshots to this same project anymore.
i hope make sense..
btw.i can upload projects to gdive if you want to check them.
http://www.ultraimg.com/image/xWFJ
|
|
|
11-11-2016, 04:05 AM
|
#954
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
uhmm..
more strange now i get all this saved 10 snapshots in some of the older projects too.
which is all of them was has empty snapshot list... i tried a few minutes ago..
is it could be just because of i press (first time) to SAVE button on the strip?
anyway..
seems non sense anymore ill go to try new one
Thanks.
|
|
|
11-11-2016, 04:09 AM
|
#955
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
uhmm..
more strange now i get all this saved 10 snapshots in some of the older projects too.
which is all of them was has empty snapshot list... i tried a few minutes ago..
is it could be just because of i press (first time) to SAVE button on the strip?
anyway..
seems non sense anymore ill go to try new one
Thanks.
|
It would be very useful to see your rpp file - will PM you with my email to save uploading
EDIT: When you close the script window - the data should be saved then (same as hitting SAVE button) - I'm still a bit puzzled by this but will get to the bottom of it with the .rpp file (one with snapshots saved please)
Last edited by lb0; 11-11-2016 at 04:18 AM.
|
|
|
11-11-2016, 04:24 AM
|
#956
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
It would be very useful to see your rpp file - will PM you with my email to save uploading
EDIT: When you close the script window - the data should be saved then (same as hitting SAVE button) - I'm still a bit puzzled by this but will get to the bottom of it with the .rpp file (one with snapshots saved please)
|
done, two projects sent, i hope they make sense.
|
|
|
11-11-2016, 05:10 AM
|
#957
|
Human being with feelings
Join Date: Jun 2015
Posts: 685
|
Quote:
Originally Posted by lb0
Enter to close message box
Right-click on saved strip in list to set as default. Then insert into empty strip page via main ... menu. Can be inserted whilst in any mode (I think)
|
This is so good, thank you! I like it that it checks that the strip page is empty before it enables the action too...
Maybe in the future the feature could be expanded to a preset menu dropdown for the top menu bar, or something like that? (don't have to go to the edit mode to insert different strips)
Thanks again!
|
|
|
11-11-2016, 05:32 AM
|
#958
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by Sju
This is so good, thank you! I like it that it checks that the strip page is empty before it enables the action too...
Maybe in the future the feature could be expanded to a preset menu dropdown for the top menu bar, or something like that? (don't have to go to the edit mode to insert different strips)
Thanks again!
|
Good idea - one for the future
|
|
|
11-11-2016, 05:55 AM
|
#959
|
Human being with feelings
Join Date: Jun 2015
Posts: 685
|
Oh, one more thing about the default/preset strip... could it also save the XY position? I like to have the strip placed a bit further away from the edges, for better readability of the text above knobs and generally more pleasant visual representation. Cheers
|
|
|
11-11-2016, 05:55 AM
|
#960
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
done, two projects sent, i hope they make sense.
|
Well - all the data is saved - your entire project is over half a million lines (mainly envelope points) :O
I've loaded your rpp file on my laptop - and apart from all the obvious missing stuff - it seems to show the snapshots ok and I can add new ones and it saves ok when i close the script window and recalls ok when i reopen it.
Something I should say. Always close the script window (or hit SAVE button) before saving your project. In edit mode it saves when you exit edit mode - but in LIVE mode - there is no way to trigger saving automatically. So when you create a snapshot or set of snapshots - close the script window before saving the project. Then please try to reopen the project and see if the snapshots are there...
I predict your problem might be that you close the project with the script window still open - this will *not* save any new data with the project. I know of no way to make this automatic - so common rule of thumb is to always close the script window first or hit SAVE button on script - then save the project. As mentioned - this probably was not noticeable to you before - because adding controls in edit mode - these get saved when you switch back to LIVE mode - tweaking parameters automatically get saved with the project as these are actually stored within the plugins themselves (and refreshed by my script on opening). But snapshots will not get saved automatically as in LIVE mode I have no autosave - as it would freeze the project whilst it saved the data every time the autosave occurred.
Would you mind going back to a project file with no snapshot data in... will email you your project file back with the data removed - and try again with the latest version.
I only ask to start again with the snapshots as the latest version uses the denormalized values - so your existing snapshots won't work.
Thanks,
Leon.
EDIT: Thinking about it - why don't I save the script data each time you add a new snapshot? Would a small extra pause be a problem at this stage for anyone with large projects? Although the delay will get bigger the more snapshots you have - just having about 10 snapshots in your huge project takes about a second to close - hmmm - that would get annoying fast if you had say 100 or more...
No I think I'll have to leave you to remember to hit the save button...
Last edited by lb0; 11-11-2016 at 06:09 AM.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 02:41 AM.
|