|
|
|
05-04-2006, 03:57 PM
|
#1
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
Working/ Broken DX and VST efx
Working Hard:
Arcdev blitter
Bionic delay 1,2
Buzroom grancomp
Dblue Glitch
Kjaherus classic delay
posihfopit eq
Sknote & SInk Mirror philter
Tone2 Filterbank2
Hardly working:
Mutagene 2warp delay.
It works fine if the effect is applied to a track,
but when i put it on an "aux/bus" track, and draw an automation curve from the track where the audio is, it first plays with clicks, and at the second time uit crashed : host frozen and an audio buffer (very short) repeating indefinitely...
arcdev et-200 delay plugin : sound works fine, but in some kind of "blind" lode (speed settings aren't shown)
Unemployable:
AIPL Warmtone
bram supatrigga
Convo Boy ( http://www.elevayta.com/) freezes Reaper (0.949) when trying to load an IR
mdsp LiveCut
psp mastercomp appears to pass no audio
Spinaudio SpineQ CM edition : only the left channel works (if it works, try to close/re-open the app : it should have set back in a "left only" mode")...
EDIT: Sorry sinkmusic, Im going to try and put the lists at the top of the thread here so Im err, borrowing your space here
sinkmusic's original post below, he gets the props
As one thread about working/broken vsti already exists, and as some plugins seem to have weird behaviour in Reaper, i have decided to create a new thread...
useful ?
Let's start :
_ Spinaudio SpineQ CM edition : only the left channel works (if it works, try to close/re-open the app : it should have set back in a "left only" mode")...
Last edited by sinkmusic; 05-14-2006 at 04:06 AM.
|
|
|
05-04-2006, 09:55 PM
|
#2
|
Human being with feelings
Join Date: May 2006
Posts: 11
|
psp mastercomp appears to pass no audio..
|
|
|
05-05-2006, 03:46 AM
|
#3
|
Human being with feelings
Join Date: Apr 2006
Posts: 39
|
Convo Boy ( http://www.elevayta.com/) freezes Reaper (0.949) when trying to load an IR.
|
|
|
05-05-2006, 04:03 AM
|
#4
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
OK : Sknote & SInk Mirror philter, Kjaherus classic delay.
NOT WORKING : bram supatrigga, mdsp LiveCut ;
|
|
|
05-05-2006, 04:48 AM
|
#5
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
Buzroom grancomp works fine, and also :
Arcdev blitter,
posihfopit eq,
Mutagene 2warp delay,
Tone2 Filterbank2,
Bionic delay 1,2
...
|
|
|
05-07-2006, 02:10 PM
|
#6
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
Me again :
My first big crash with REaper :
using Mutagene 2warp delay.
It works fine if the effect is applied to a track,
but when i put it on an "aux/bus" track, and draw an automation curve from the track where the audio is, it first plays with clicks, and at the second time uit crashed : host frozen and an audio buffer (very short) repeating indefinitely...
(I'm no specialist, but it looks like a PDC issue, or buffer stuff...)
Grrrr !
|
|
|
05-13-2006, 08:33 AM
|
#7
|
Human being with feelings
Join Date: May 2006
Posts: 61
|
CamelSpace not working for me, or at least it not as it should. The main issue is that all controls relating to tempo sync and beat division (e.g., trancegate "length" control, LFO "rate" control when sync is selected) do not produce the expected results--everything sounds crackly and fritzy.
Getting lots of pops with it too, even when all sync functions are turned off.
|
|
|
05-13-2006, 09:38 AM
|
#8
|
Human being with feelings
Join Date: Apr 2006
Posts: 110
|
Quote:
Originally Posted by Magpel
CamelSpace not working for me, or at least it not as it should.
|
Did you try turning off worker threads?
You can find it in Options -> Preferences -> Audio.
This seems to be the thing to try with plugs that are misbehaving. You seem to loose some processing power doing it but it does sometimes fix the problem.
|
|
|
05-13-2006, 10:59 AM
|
#9
|
Human being with feelings
Join Date: May 2006
Posts: 61
|
Quote:
Originally Posted by Hedgehog
Did you try turning off worker threads?
You can find it in Options -> Preferences -> Audio.
This seems to be the thing to try with plugs that are misbehaving. You seem to loose some processing power doing it but it does sometimes fix the problem.
|
Thanks for the suggestion. It didn't work for me unfortunately. CamelSpace works perfectly in Sonar4 on the same machine, but just doesn't sync up or sound at all right in REAPER.
I haven't tried the newest release, though.
|
|
|
05-14-2006, 03:36 AM
|
#10
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
Digitalfishphones compressors : Reaper "sees" no presets for them...
|
|
|
05-14-2006, 04:05 AM
|
#11
|
Human being with feelings
Join Date: Feb 2006
Location: decepticon mothership in a hidden place inside a mountain
Posts: 3,754
|
Xoxos Arp4midi : freezes Reaper with big noise ! argggh
|
|
|
06-10-2006, 06:10 PM
|
#12
|
Human being with feelings
Join Date: Jun 2006
Posts: 193
|
VSampler 3 DXi caused serious BIOS crash
VSampler 3, running as a DXi, was having some problems loading in the Reaper FX window. The FX window would enlarge to make room for it, but it would be a blank window with no output. Closing Reaper then reopening it to the FX window would *sometimes* force VSampler to load.
Then, shorly after it loaded on one occasion, BAM out of the nowhere, the horrible BLUE SCREEN OF DEATH that said something to the effect, "Windows has encountered a serious error and has shut down to prevent damage to your computer. If this problem persists, change your caching settings in the BIOS."
Wow! Never had that happen before.
-Andrew
|
|
|
06-10-2006, 06:47 PM
|
#13
|
Human being with feelings
Join Date: Jun 2006
Posts: 193
|
Quote:
Originally Posted by ajs
Then, shorly after it loaded on one occasion, BAM out of the nowhere, the horrible BLUE SCREEN OF DEATH that said something to the effect, "Windows has encountered a serious error and has shut down to prevent damage to your computer. If this problem persists, change your caching settings in the BIOS."
Wow! Never had that happen before.
-Andrew
|
Crashed again, this time a few seconds after closing a VSamper-enabled Reaper. I took closer look at the error message this time. That part about the BIOS was just a suggestion, but it said, before that, "A driver may potentially be causing conflicts in your system" or something like that.
|
|
|
06-11-2006, 05:32 PM
|
#14
|
Human being with feelings
Join Date: Jun 2006
Posts: 413
|
Hi, Im new here, just trying reaper. Nice impressive list of features. It looks very stable. Im tryng to load the infinite list of plugins i have in my hardisk.
I know, it happens with any host, not all VST plugins works in all hosts/setups. Im wondering how reaper manage this, if any log file is created. I load my vst folder path, and in a given vst fx reaper crash. I suppose i must locate the evil dll, and move it. Beyond that, i like the way Tracktion manage this trouble. Like reaper, it dont like some plugins. But, if it crash while searching, the evil plugin is listed in an exclusion list, and is not taken in count for tracktion, so, you dont need to move the dll. If Tracktion crash while scanning, the next startup, it will continue from the point it crashed, excluding the bad plugin.
Well, can be a good idea some kind of exclusion list to avoid move some dll that works in other host.
Keep up the hard work, the program is a good one!
|
|
|
06-11-2006, 05:47 PM
|
#15
|
Human being with feelings
Join Date: Jan 2006
Location: Port Neches, Texas
Posts: 1,948
|
There is a log created (a ini, actually). It is located in Documents and Settings/<username>/Application Data/Reaper
__________________
IT'S A TROMBONE !!!
|
|
|
06-12-2006, 10:22 AM
|
#16
|
Human being with feelings
Join Date: Jun 2006
Posts: 413
|
Quote:
Originally Posted by fluffy
There is a log created (a ini, actually). It is located in Documents and Settings/<username>/Application Data/Reaper
|
Thanks!
That ini file looks a little cryptic. If i wan that a plugin become not listed, i simple delete the line that refers it from the ini?
|
|
|
02-05-2007, 01:56 AM
|
#17
|
Mortal
Join Date: Feb 2006
Posts: 6,654
|
"Note Queue" - a damn handy thing if it would work - sadly crashes Reaper pretty quickly. http://www.asseca.com/nicfit/notequeue.html is the site. It would be nice if Justin and Co. could build this functionality right into Reaper.
|
|
|
02-10-2007, 03:06 PM
|
#18
|
Human being with feelings
Join Date: Jan 2007
Location: Europe
Posts: 36
|
Senderella (http://subminimal.org/tools.php)won't work(the send wouldn't ..."send" the audio to the "receiver").
The email address of the developper is nowhere on his website
|
|
|
02-26-2007, 06:44 PM
|
#19
|
Human being with feelings
Join Date: Apr 2006
Location: London
Posts: 519
|
Yo, just a quicky to say that SFZ is still a deathtrap on my machine (dual core - dunno if that's relevant). +100db sounds and all that jazz.
|
|
|
02-28-2007, 10:00 AM
|
#20
|
Human being with feelings
Join Date: Aug 2006
Location: Toronto, Canada
Posts: 149
|
RealGuitar
Has anyone had success using Musiclab's RealGuitar in Reaper?
http://www.musiclab.com/products/realgtr_info.htm
I'm trying the demo and I can't get strumming or picking patterns to work within Reaper, however they do work from a simple VST host like Minihost.
Anyone?
|
|
|
02-28-2007, 10:54 AM
|
#21
|
Human being with feelings
Join Date: Aug 2006
Location: A place that allows me to protect myself...
Posts: 8,245
|
I'm downloading the demo to try it out. In the meantime, do you have "Always run FX" set in Reaper Preferences? Some of these VSTi sample based jobbies seem to need that option set in Reaper...
D
|
|
|
05-13-2011, 06:05 PM
|
#22
|
Human being with feelings
Join Date: May 2011
Posts: 3
|
Working VSTi's
I am successfully using the following Sonivox VSTi's in Reaper:
Vocalizer ***
Playa
Sampla
Hip Hop Strings
Aggro-Electro Boom
Reggaeton
***It took a while to figure out Sonivox Vocalizer but you have to add the VSTi in the audio track, then you have to create a send from a midi track to that channel in an audio channel. In order to hear it, you must have an audio track recorded and you need to turn record monitoring on in the midi channel. I am not sure if you can monitor live or not, like they lead you to believe is possible in the Vocalizer videos.
Way to go Reaper!
Any experience with Antares Autotune?
Thanks.
Eric
|
|
|
08-12-2011, 05:56 AM
|
#23
|
Human being with feelings
Join Date: Aug 2011
Posts: 46
|
Astroidmist's Buggy Plugin List
As of Reaper v4.0 (August 12, 2011), VST(i) and DirectX plugins that seem to crash during scan/loading of types/names:
Beat Thang Virtual (v2.1.1, VSTi)
Cakewalk StudioVerb2 (DirectX effect)
Energy XT VSTi (v2.5.4)
FL Studio VSTi
FL Studio VSTi (Multi)
S1DXi.dll (Synth1 VST DirectX instrument)
TyrellN6 (VSTi by u-he)
ACE (Any Cable Everywhere) Demo VSTi had issues during first few scans, but then seemed to stop crashing.
Good luck with your troubleshooting.
At first I disabled VST getting of names/types to prevent crashes. I also totally disabled DirectX plugins and DirectX plugin scanning. Doing both of those allowed to at least get Reaper running past the splash screen. Then later on I enabled those one at a time and watched the scanning after initiating it.
Reaper v4 appears to freeze during the crashes, but it actually keeps running if you let it continue. Each time it crashes you can write down which one seemed to cause the crash.
I used AnalogX DX Man (DirectX Manager) to unregister the buggy DirectX plugins. Then I deleted them at their folder source so they wouldn't be loaded again.
http://analogx.com/contents/download...n/Freeware.htm
To use DX Man, you drag the file onto it's window and respond to the pop-up window choices. You can register or unregister DirectX plugins that way. DirectX plugins need to be unregistered before their files are deleted.
After I removed both the buggy VST(i)'s and the buggy DirectX plugins, everything seemed to scan and load without troubles.
This is the first time I have successfully gotten Reaper to run since about version 2 when I first started testing Reaper.
|
|
|
10-08-2011, 01:49 PM
|
#24
|
Human being with feelings
Join Date: Aug 2011
Posts: 46
|
As of October 8th, 2011...
ZynAddSubFX (synth VSTi) crashes Reaper during certain random operations within the synth. For example, loading certain instrument presets crashes Reaper. Also it can crash during playback if you play too many notes really fast. There's a correlation to the polyphony/built-in effects use/overal CPU load as well.
It's useable in between crashes, but since it does crash the entire program and project session, I recommend against using it at all. If you must use it, use it carefully and at modest settings and freeze it as soon as possible.
As far as I understand it, ZynAddSubFX never made it out of the beta stage anyhow and was abandoned by the creator.
|
|
|
12-08-2011, 10:37 PM
|
#25
|
Human being with feelings
Join Date: Oct 2009
Posts: 7
|
Auto-tune VST efx causes Blue Screen of death.
|
|
|
12-14-2011, 02:19 PM
|
#26
|
Human being with feelings
Join Date: Mar 2011
Posts: 3
|
I haven't even been able to load these vst effects
Psp OldTimer
Elephant
Density MKII (<- really needed that :S )
Gclip
EpicVerb
Everything else works perfectly, Reaper rocks, deserves every cent paid, and everyone at Cockos rock (Until I learn how to use Cubase, no offense)
|
|
|
03-06-2014, 12:42 PM
|
#27
|
Human being with feelings
Join Date: Oct 2012
Posts: 2
|
AMD bass rack closes down every time
|
|
|
07-05-2014, 03:07 PM
|
#28
|
Human being with feelings
Join Date: Apr 2013
Location: Lake Havasu City, Arizona
Posts: 151
|
Mdrummer issues
Does anyone out there have Reaper crash issues with Melda Productions free version of Mdrummer small free version. I downloaded and installed it ok after 3 tries but when it loads in Reaper it crashes Reaper and quits unexpectedly. I had to remove it all and toss it in the trash. Once I deleted them, Reaper returned to it's normal self. So like is there a secret to getting this to work? I'm on a MAC OS X MT LION 10.8.5. I used stuffit as they suggested to but to no avail.
__________________
--Mac Mini, 3 GHz 2 core i7 CPU, 16GB RAM, OSX Catalina V10.15.7 Crucial 1TB primary SSD, 500GB Samsung T5 SSD ext Audio drive,dual 27" displays, Reaper 64 bit latest, SSL 2+ interface, Mackie MR8 Mk 3 8" Monitors and Mackie VLZ 1404 mixer. 30 years in Audio.
|
|
|
07-05-2014, 03:15 PM
|
#29
|
Human being with feelings
Join Date: May 2010
Posts: 1,717
|
|
|
|
07-25-2014, 10:43 AM
|
#30
|
Human being with feelings
Join Date: Jul 2014
Location: California, USA
Posts: 1
|
Plugins that hang/freeze Reaper 64bit v4.71 during startup scan:
Roger Linn Adrenalinn Sync (used to work in an earlier version)
CableGuys FilterShaper, VolumeShaper, MidiSpaher, Pancake
There are 20 or 30 more I'll have to write down. A lot are SynthEdit plugs.
Edit:
I've got Adrenalinn Sync working in FL Studio, but it still won't work in Reaper x64 4.72. I've tried deleting it from the "reaper-vstplugins64.ini"
to try and force it to rescan, but it doesn't help. It doesn't show in the list of available plugs.
Last edited by edteneyck; 09-03-2014 at 11:59 PM.
|
|
|
08-02-2014, 09:05 PM
|
#31
|
Human being with feelings
Join Date: Oct 2013
Posts: 509
|
Equilibre freeware parametric EQ doesn't properly display in ubuntu studio v14.04 LTS linux under wine v162 on reaper v47x. Luckily, the sound seems OK and the GUI can be turned off using reaper's UI button in the vst window frame that reaper provides. Equilibre vst is vaporware now and used to be known as Double Precision EQ.
|
|
|
11-08-2014, 05:54 PM
|
#32
|
Human being with feelings
Join Date: Feb 2013
Posts: 57
|
xoxos Radian crashes
I, too, have been having a hell of a time using xoxos' Radian. I can use it on up to 3 tracks without using the "buggy plugin mode", adding it to a 4th track causes reaper_host32 to crash. If I check the "buggy" box, I can put it on 4 tracks, but adding a 5th crashes reaper_host32.
I talked with xoxos about this and he says it is a very straightforward SynthEdit VST with only one custom module. I am also able to put it on as many tracks as I want in Podium. And xoxos tests his plugins with EnergyXT, and he hasn't seen this problem there, either. So I am quite certain this is a REaper-specific issue.
I am running REaper v4.75 x64
Any other ideas?
FYI - xoxos suggested that I try making multiple copies of the DLL in different directories. This solves the crashing problem (at least up to 8 instances), but now it is getting totally out of hand as I need at least another 8 instances for my current project, and running multiple copies makes passing presets around quite painful.
Last edited by Ishkabbible; 11-08-2014 at 06:13 PM.
Reason: added EnergyXT as another example where it DOES work
|
|
|
09-06-2016, 01:17 PM
|
#33
|
Human being with feelings
Join Date: Apr 2013
Location: Lake Havasu City, Arizona
Posts: 151
|
AudioThing Speaker plugin
Don't know who's tried this plug it adds EQ and compression/distortion to create a cheap speaker or broken radio sound. Works good but is a little buggy when added with other VST's. I suggest a go around by multing the track to a new one and using it dedicated.
__________________
--Mac Mini, 3 GHz 2 core i7 CPU, 16GB RAM, OSX Catalina V10.15.7 Crucial 1TB primary SSD, 500GB Samsung T5 SSD ext Audio drive,dual 27" displays, Reaper 64 bit latest, SSL 2+ interface, Mackie MR8 Mk 3 8" Monitors and Mackie VLZ 1404 mixer. 30 years in Audio.
|
|
|
05-23-2017, 02:57 PM
|
#34
|
Human being with feelings
Join Date: May 2017
Posts: 44
|
Helm and Tunefish4
I posted this in the bug thread, but reposting here for completeness. They occasionally crash Reaper when being added. On reload of Repear, I can usually add fine and use fine and save and reload.
Reaper v5.40 x64 rev 584a8e (win10)
These are both open source plugins as well, so that may help debugging:
https://github.com/mtytel/helm
https://github.com/paynebc/tunefish
|
|
|
08-08-2019, 04:47 PM
|
#35
|
Human being with feelings
Join Date: Dec 2017
Posts: 179
|
Image-line Wave Candy crashes Reaper. Just have to have it running for a while and it will happen eventually.
|
|
|
08-09-2020, 08:09 AM
|
#36
|
Human being with feelings
Join Date: Mar 2010
Location: Minneapolis, MN, USA
Posts: 38
|
Nugen Stereoizer
I have been back-and-forth with Nugen tech support but they cannot come up with a solution. I've tried clean uninstall and re-install of their 2019 version, and 2017 version, as a control experiment but I get "intermittent" problem that the previous session's settings on the plug-in do not load. It loads instead to one of two degenerate states, with "generic settings" of two different flavors.
I am running 6.13 x64 on two different machines, and it can happen on either machine. I tried clean uninstall and re-install of 6.11; same thing.
I did not have this issue prior to May 28, 2020.
I tried installing Microsoft latest XML-handling dll's; no change.
Corrupted RPP files will show a different number of parameters in the Nugen section, but Nugen TS did not seem to be able to evaluate the significance. Once the RPP file gets corrupted, it does not appear to be reparable.
Any insight would be appreciated.
J
__________________
My questions refer to recordings of my noise band Amoeba, made with a stereo room mike or up to 6 tracks with room mikes, and maybe a direct in or two.
|
|
|
08-11-2020, 04:16 PM
|
#37
|
Human being with feelings
Join Date: Jul 2020
Posts: 2
|
Arturia B3 low level noise issue
When I insert the B-3 V2 into a track in Reaper 6 (latest update July 2020) it shows low level activity in the meter with nothing playing. I don't actually hear anything, but it kinda looks like it might be emulating the hum you get from a bad cord or jack :-)
It does NOT happen when I load the B3 into Cakewalk by Bandlab, and it does not happen in Reaper with other synths from Arturia V6 Collection.
I had contacted Arturia support but gotten no useful response.
|
|
|
02-20-2021, 08:54 AM
|
#38
|
Human being with feelings
Join Date: Oct 2020
Posts: 1
|
TB ProAudio vmMeter 2
Hi
I recently changed my system from win7 x64 to win10 x64, after that reinstall all my stuff, included TB ProAudion vmMeter 2. When I try to insert this plugin, Reaper crash and close inmediatly
Can anyone help me to fix this problem?.
|
|
|
02-14-2022, 06:36 AM
|
#39
|
Human being with feelings
Join Date: Aug 2021
Location: Leipzig, Germany
Posts: 14
|
CRASHES
CHOOSIN AKAI MPC 2.10.1 AS VST - REAPER CRASHES
I am travelling on macOS 10.12.6 ;-)
|
|
|
06-23-2022, 10:53 AM
|
#40
|
Human being with feelings
Join Date: Jun 2022
Posts: 1
|
Odin2 crashes on linux
Hi.
Odin 2.3.3 crashes Reaper 6.6.1 on Pop!_OS 22.04 LTS x86_64.
It used to work before (but not sure about the versions), and I have a project where I used this plugin and now it will not load
I also reported this bug to Odin's github https://github.com/TheWaveWarden/odin2/issues/432
|
|
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 08:24 AM.
|