Quote:
Originally Posted by BlessedOne72
Yes ... indeed it has onboard / inbuilt Phantom Power, but it's 24V ;
I need 48V for my MXL 990 .
- BOne -
|
I managed to get signal from the TASCAM through the TC to the UAD .
I checked the signal from TASCAM's Headphones Out and the signal was crystal clear on that end . But monitoring through the Critical Mass on the UAD sound is crackling, no matter whatever I tried .
I received support from Music Tribe / TC regarding the Critical Mass ;
Connect from your Mic directly to the interface input1.
Connect your interface output to the Critical Mass input.
Connect from the critical mass to input 2 of your interface. You should then hear the affect audio through input 2.
I did this and now I've ended up with a dead Critical Mass .
It used to power on with a PSU ; Now it's not turning on neither with a PSU or Batteries .
Waste Of Time / Waste Of Money
- BOne -