Madronna's Lab Virta - Setting up audio into VSTi

Zlornick · 03-30-2016, 03:57 PM

Demoing Madronna Lab's Virta which has a unique twist of being a VSTi synth that can be controlled by audio using pitch detection. It also can be used as a traditional midi synth as well as a vocoder and perhaps more.

One thing I've run into is the raw audio seeping through underneath the VSTi, which I don't think is the intended use of the plugin. Not sure how to get around this. I've tried a couple different routing setups, including sending audio from a different track with midi controlling the Virta track. Still the raw audio is audible underneath. This might be how Reaper handles audio going into a VSTi and there's no way around it, or perhaps there's a setting somewhere I am missing.

For those interested:
http://madronalabs.com/products/virta

kenzak · 04-01-2016, 10:33 AM

I just tested and this works for Virta: http://forum.cockos.com/showpost.php...88&postcount=2

You just need two tracks and some custom routing.

Zlornick · 04-01-2016, 03:36 PM

Yeah, that works. I tried some combo of 4 tracks on a channel, but I didn't get this particular setup.

This is technically sending audio to the VSTi as a sidechain, right?

Another option is to keep the audio track going to the master buss but have the send to the Virta track setup for Pre-fader/post FX and you can mix in and out your raw audio signal without changing the signal to the Virta track.

Regardless, pretty cool plug.

Thanks!

kenzak · 04-02-2016, 04:31 PM

I'm don't think it is really side chaining, just a special routing. I bought a Reaper license when I was having issues with another DAW. I only use it every now and then. In no way am I an expert. It is growing on me though...

03-30-2016, 03:57 PM	#1
Zlornick Human being with feelings Join Date: Nov 2015 Posts: 188	Madronna's Lab Virta - Setting up audio into VSTi Demoing Madronna Lab's Virta which has a unique twist of being a VSTi synth that can be controlled by audio using pitch detection. It also can be used as a traditional midi synth as well as a vocoder and perhaps more. One thing I've run into is the raw audio seeping through underneath the VSTi, which I don't think is the intended use of the plugin. Not sure how to get around this. I've tried a couple different routing setups, including sending audio from a different track with midi controlling the Virta track. Still the raw audio is audible underneath. This might be how Reaper handles audio going into a VSTi and there's no way around it, or perhaps there's a setting somewhere I am missing. For those interested: http://madronalabs.com/products/virta

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-01-2016, 10:33 AM	#2
kenzak Human being with feelings Join Date: May 2009 Posts: 2	I just tested and this works for Virta: http://forum.cockos.com/showpost.php...88&postcount=2 You just need two tracks and some custom routing.

04-01-2016, 03:36 PM	#3
Zlornick Human being with feelings Join Date: Nov 2015 Posts: 188	Yeah, that works. I tried some combo of 4 tracks on a channel, but I didn't get this particular setup. This is technically sending audio to the VSTi as a sidechain, right? Another option is to keep the audio track going to the master buss but have the send to the Virta track setup for Pre-fader/post FX and you can mix in and out your raw audio signal without changing the signal to the Virta track. Regardless, pretty cool plug. Thanks!

04-02-2016, 04:31 PM	#4
kenzak Human being with feelings Join Date: May 2009 Posts: 2	I'm don't think it is really side chaining, just a special routing. I bought a Reaper license when I was having issues with another DAW. I only use it every now and then. In no way am I an expert. It is growing on me though...