QuNexus has now a sequencer (K-Board, too - with a hack)

[Nana]

Hi.
Some news for the owners of QuNexus and the K-Koard:
https://www.keithmcmillen.com/products/qunexus/
Owners of the black version of QuNexus can now load the new V2 Editor, which flashes the new firmware 2.0.2 if allowed by the user.

The new firmware runs perfectly well with Reaper and the famous QunexusUnleashed plugin:
https://stash.reaper.fm/browse.php?q=qunexus

Caution: A hacked K-Board will refuse the firmware upload via the V2 Editor!
It will just show a red shift-LED, because it is in bootloader mode, and the editor throws up some errors, because the computer sees a K-Board again.
Once the K-Board is disconnected and reconnected, it should return to previous QuNexus behaviour without being upgraded.

In case, at your own risk, you wish to flash the new firmware to a hacked K-Board, just close the V2 Editor and send the QuNexus_Firm...2.syx via MIDI-OX to the K-Board in bootloader mode, after you have changed the byte at position 0x05 (Always scroll up to the very beginning of the file, once more, because of a bug!) from 0x19 to 0x1A.
If you wish to kick a non-hacked K-Board into bootloader, send the k-board-bootloader.syx to the K-Board, which should then show a red LED and then may flash the firmware in the described way, too.
As written: All the above you do at your own risk!