What I would first check is the value of the eventual non Walter envcp_min_height setting in the rtconfig.txt file (it should be in the header of it). If it's present, adjust its value to the second parameter defined for the tcp_heights one (this one must be defined). In example, if you have something like this :
tcp_heights 5 30 50 50
... use this :
envcp_min_height 30
It should do the job. Maybe another thing to check is to be sure that the vertical placement of the envcp panel controls are the same as the tcp ones when only one line is displayed. It's difficult to say if it's the case, here, as your screenshot seems having been more or less enlarged, making it blurry.
HTWH...
__________________
DAW: Ryzen 3700X|Asus X-470Pro|32Gb|2 SSD512(M2)+1024|W10Pro(64)|RME Fireface UCX+ADA8200
Soft: Reaper|Cubase 10|Emulator X3 & several other VSTis (2 bridged)...
Gear: VMK-188+|MPD32|ME30P|Korg 05R/W|Roland D110|Yamaha TX802|Pre-MIDI stuff...
Last edited by cubic13; 10-19-2018 at 10:31 PM.
|