|
|
|
03-10-2017, 09:40 PM
|
#2601
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Just for the record about my "Solo" problem
maybe someone need someday.
had an idea to try with the
Track:Set solo for track xx [MIDI CC/OSC only] actions...
assigned first 20 track's Solo to midi CCs and added this CC parameters into Stripper,
works great so far!
|
|
|
03-12-2017, 06:36 AM
|
#2602
|
Human being with feelings
Join Date: Dec 2009
Posts: 543
|
Quote:
Originally Posted by lb0
done!
|
e-mail sent. sorry for the little delay
|
|
|
03-12-2017, 11:21 PM
|
#2603
|
Human being with feelings
Join Date: Mar 2011
Posts: 64
|
Another question: Could Stripper have 'dummy' controls? In the way that you could link whatever parameters you want to it, even from different plugins? F.ex: moving q, gain and freq of an eq with one button, or a boost and cut at the same time?
And perhaps let you control the rate the control is affecting the chosen parameters?
Last edited by saastara; 03-12-2017 at 11:42 PM.
|
|
|
03-13-2017, 12:35 AM
|
#2604
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by saastara
Another question: Could Stripper have 'dummy' controls? In the way that you could link whatever parameters you want to it, even from different plugins? F.ex: moving q, gain and freq of an eq with one button, or a boost and cut at the same time?
And perhaps let you control the rate the control is affecting the chosen parameters?
|
Look for the macro controls. Sounds like they will do what you want? Under Action & Meters (yeah I know - not obvious) - on TR PARAM edit mode.
|
|
|
03-14-2017, 07:17 AM
|
#2605
|
Human being with feelings
Join Date: Mar 2011
Posts: 64
|
Quote:
Originally Posted by lb0
Look for the macro controls. Sounds like they will do what you want? Under Action & Meters (yeah I know - not obvious) - on TR PARAM edit mode.
|
Yes, found them and they indeed work but one question / fr:
Could the macros not 'ovet ride' each other, when controlling same parameters? F.ex if I have a hpf and lpf, I can set one macro control to control how narrow or wide the bandwith is between them.. But when I set another macro to control the freq of both filters at the same time without changing their relative bandwith, the other macro takes over and jerks the parameters.
So would it be possible to use macros in conjuction with other macros, without them jerking parameters around?
Last edited by saastara; 03-14-2017 at 08:46 AM.
|
|
|
03-14-2017, 09:30 AM
|
#2606
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by saastara
Yes, found them and they indeed work but one question / fr:
Could the macros not 'ovet ride' each other, when controlling same parameters? F.ex if I have a hpf and lpf, I can set one macro control to control how narrow or wide the bandwith is between them.. But when I set another macro to control the freq of both filters at the same time without changing their relative bandwith, the other macro takes over and jerks the parameters.
So would it be possible to use macros in conjuction with other macros, without them jerking parameters around?
|
you want a soft takeover on the values?
I'll see if I can add it as an option. Not thought about how to do it yet... Of course - you could always remove the bandwidth controls from the macro that alters the frequency controls.
Relative mode has been suggested to me before - but I'm not sure I can get my head around how it would work in this case...
|
|
|
03-14-2017, 10:22 AM
|
#2607
|
Human being with feelings
Join Date: Mar 2011
Posts: 64
|
Quote:
Originally Posted by lb0
you want a soft takeover on the values?
I'll see if I can add it as an option. Not thought about how to do it yet... Of course - you could always remove the bandwidth controls from the macro that alters the frequency controls.
Relative mode has been suggested to me before - but I'm not sure I can get my head around how it would work in this case...
|
I meant that the macros wouldn't contradict at all with each other.
Case in point:
I put a Hpf at 2khz and a lpf at 4khz. Assign a macro to control both values, creating kind of a Q-control, from with I can widen or narrow the filters. Now I put in another macro that I'd like to control both filters, but without changing their relative distance from each other. So this macro is acting as a kind of 'center frequency controller' between the filters.
But at the moment this doesn't seem to be possible, since when touching the other macro, the parameters get jerked to where ever they were before, and vice versa.
Last edited by saastara; 03-14-2017 at 11:02 PM.
|
|
|
03-15-2017, 12:59 AM
|
#2608
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by saastara
I meant that the macros wouldn't contradict at all with each other.
Case in point:
I put a Hpf at 2khz and a lpf at 4khz. Assign a macro to control both values, creating kind of a Q-control, from with I can widen or narrow the filters. Now I put in another macro that I'd like to control both filters, but without changing their relative distance from each other. So this macro is acting as a kind of 'center frequency controller' between the filters.
But at the moment this doesn't seem to be possible, since when touching the other macro, the parameters get jerked to where ever they were before, and vice versa.
|
I'll see if I can come up with a solution
|
|
|
03-15-2017, 02:58 AM
|
#2609
|
Human being with feelings
Join Date: Dec 2009
Posts: 543
|
Quote:
Originally Posted by lb0
Relative mode has been suggested to me before
|
some kind of a Increase/Decrease-mode for macros mode would be very lovely indeed
|
|
|
03-15-2017, 03:33 AM
|
#2610
|
Human being with feelings
Join Date: Mar 2011
Posts: 64
|
Cheers, thanks for the wonderful work.
|
|
|
03-17-2017, 02:31 AM
|
#2611
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
Hit a Bug ...
Using new Nebula-4.
Editing a knob ... got this error.
Reaper 5 [portable]\Scripts\LBX\LBX Stripper.lua:20103: attempt to index a nil value (field '?')
Also, having difficulty making a STEPPED knob. Maybe a related issue. SCANNED values do not accumulate regarding of the 'scan time' setting.
thx
|
|
|
03-17-2017, 02:52 AM
|
#2612
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
Hit a Bug ...
Using new Nebula-4.
Editing a knob ... got this error.
Reaper 5 [portable]\Scripts\LBX\LBX Stripper.lua:20103: attempt to index a nil value (field '?')
Also, having difficulty making a STEPPED knob. Maybe a related issue. SCANNED values do not accumulate regarding of the 'scan time' setting.
thx
|
Hi RJ,
Ok - I've not yet tested latest N4. My neb4 has been stable for me so I've been holding off doing any updates until they released any must have features.
I'll look into over the weekend - looking at the line of code failing I doubt it's anything really to do with N4. Is it a repeatable bug? Does it happen each time you change the value of the knob?
Are you just having trouble setting up the cycle control with N4 - have you tested if you have the same difficulties with any algo plugs?
EDIT: Of course it might be N4 related if the latest N4 is not allowing the cycle control setup procedure to complete properly.
Thanks,
Quick question - does the cycle control setting up fail on all libraries in N4 (that you've tested) - or just a particular one?
Last edited by lb0; 03-17-2017 at 03:30 AM.
|
|
|
03-17-2017, 05:22 AM
|
#2613
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
Hit a Bug ...
Using new Nebula-4.
Editing a knob ... got this error.
Reaper 5 [portable]\Scripts\LBX\LBX Stripper.lua:20103: attempt to index a nil value (field '?')
Also, having difficulty making a STEPPED knob. Maybe a related issue. SCANNED values do not accumulate regarding of the 'scan time' setting.
thx
|
Have found the bug in the cycle control scanning - accidentally deleted a , in a function call. Will post an update shortly...
EDIT: new update. Should fix RJ's cycle scanning issue - most probably will fix the other issue you were having also RJ - but I've not got Nebula available here to test. You may wish to rescan the problem control as I suspect it is the stored scanned values that are causing the error - so the fix by itself will not prevent the error until the cycle control data is updated (I'm assuming this).
Please let me know if the problem persists.
Also - I've upgraded the 'waiting time' algorithm used by the cycle controls, so you may find the your sensitivity settings being slightly different - and you may need to change what you're used to using.
Please let me know if you have any difficulties here (ie. scanning fails to read values even on highest sensitivity setting) - as it may require a little fine-tuning for Nebula.
Last edited by lb0; 03-17-2017 at 05:49 AM.
|
|
|
03-17-2017, 08:54 AM
|
#2614
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
eham.. need to ask a silly question about the Macro Control
-is it possible to get a starter/newbie gif demonstration ?
-trying to assign 10 bypass switch to one macro control
and want to activate one of them on every knob (macro) steps..
so step 1 will activate only bypass 1,
step 2 will activate only bypass 2.. so on
is this possible with the Macro Control? if so ..how?
|
|
|
03-17-2017, 09:12 AM
|
#2615
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
eham.. need to ask a silly question about the Macro Control
-is it possible to get a starter/newbie gif demonstration ?
-trying to assign 10 bypass switch to one macro control
and want to activate one of them on every knob (macro) steps..
so step 1 will activate only bypass 1,
step 2 will activate only bypass 2.. so on
is this possible with the Macro Control? if so ..how?
|
Currently I doubt it is possible. At the moment the macro control works essentially like a single dimension version of the xy pad. So morphs between settings A and B for each parameter. But additionally has the transfer function to allow for non-linear morphing.
In order to do what you require, it would have to allow some sort of bounce-back of value so it goes from 0 to 1 back to 0 at a different point along the macro knob travel for each bypass switch. I could add transfer functions that would allow this bounce back, but I think controlling it in a meaningful way like you want would be hard and fiddly.
Another way of doing what you want would be with snapshots. You could create a subset containing just the bypass switches, then take a snapshot for each setting. I know this isn't then controlled by a knob - but I could probably add a knob style control to travel through snapshots - although it probably would not work well with complex huge snapshots, it should be ok for small sets.
|
|
|
03-17-2017, 09:26 AM
|
#2616
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Currently I doubt it is possible. At the moment the macro control works essentially like a single dimension version of the xy pad. So morphs between settings A and B for each parameter. But additionally has the transfer function to allow for non-linear morphing.
In order to do what you require, it would have to allow some sort of bounce-back of value so it goes from 0 to 1 back to 0 at a different point along the macro knob travel for each bypass switch. I could add transfer functions that would allow this bounce back, but I think controlling it in a meaningful way like you want would be hard and fiddly.
Another way of doing what you want would be with snapshots. You could create a subset containing just the bypass switches, then take a snapshot for each setting. I know this isn't then controlled by a knob - but I could probably add a knob style control to travel through snapshots - although it probably would not work well with complex huge snapshots, it should be ok for small sets.
|
ah! ok,
no need to add anything to macro controls or snapshots..
ill use subset happily!
Thank you!
|
|
|
03-17-2017, 09:29 AM
|
#2617
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by timbralzoom
ah! ok,
no need to add anything to macro controls or snapshots..
ill use subset happily!
Thank you!
|
Did you specifically require knob control rather than the snapshot list?
|
|
|
03-17-2017, 10:10 AM
|
#2618
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
Quote:
Originally Posted by lb0
Did you specifically require knob control rather than the snapshot list?
|
No!,
this was my first messing time with the Macro Controls..
so it was just out of curiosity!
|
|
|
03-17-2017, 10:20 AM
|
#2619
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
Hit a Bug ...
Using new Nebula-4.
Editing a knob ... got this error.
Reaper 5 [portable]\Scripts\LBX\LBX Stripper.lua:20103: attempt to index a nil value (field '?')
Also, having difficulty making a STEPPED knob. Maybe a related issue. SCANNED values do not accumulate regarding of the 'scan time' setting.
thx
|
Hi RJ,
Just installed latest (experimental vers. I) N4 - and all working ok with latest version of Stripper. Please can you let me know if this works for you now.
EDIT: Just as I write that and go back to my test project - it doesn't allow me to change the values anymore - even as a simple knob. hmmm... but it worked fine moments earlier.
EDIT2: Working again now - dunno what was going on there... pretty sure if there is a glitch it's on N4's side - as I've not done anything which should affect this.
Last edited by lb0; 03-17-2017 at 10:35 AM.
|
|
|
03-17-2017, 01:56 PM
|
#2620
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
So far, the latest update is now working with N4 again.
The new scanning feature, and progress bar, is very nice. It now accurately grabs all values.
If there was a 'nit-pick', it seems I must always select all 3 check boxes in the Cycle Button Scan option. Might they be changed to DEFAULT checked ? Would that mess up other uses ? Just wondering.
Will be doing more testing tonite ... but things looking good at the moment.
Thanks !
|
|
|
03-17-2017, 02:51 PM
|
#2621
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
So far, the latest update is now working with N4 again.
The new scanning feature, and progress bar, is very nice. It now accurately grabs all values.
If there was a 'nit-pick', it seems I must always select all 3 check boxes in the Cycle Button Scan option. Might they be changed to DEFAULT checked ? Would that mess up other uses ? Just wondering.
Will be doing more testing tonite ... but things looking good at the moment.
Thanks !
|
Great!
New update remembers (per session) what you set the 3 buttons to. Of course - if you select a cycle control with different settings - it remembers those settings instead. Does that work better?
|
|
|
03-17-2017, 03:38 PM
|
#2622
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
I'll look closer at those.
Something else I did notice had to do with TEXT. It seemed the font settings were not showing the correct status on the checkboxes. i.e.: a TEXT that was italic did not have that status checked.
Another thought ... right clicking on a graphic, I found I could not Copy and paste ... that would be handy putting a GUI together.
Something else ... using a SLIDER, I needed a Horizontal one. I saw the check-box for that setting, but it didn't do anything I expected or was hoping ... what does it do ?
Just getting back to LBX, so I hope to learn more.
|
|
|
03-17-2017, 03:48 PM
|
#2623
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
I'll look closer at those.
Something else I did notice had to do with TEXT. It seemed the font settings were not showing the correct status on the checkboxes. i.e.: a TEXT that was italic did not have that status checked.
Another thought ... right clicking on a graphic, I found I could not Copy and paste ... that would be handy putting a GUI together.
Something else ... using a SLIDER, I needed a Horizontal one. I saw the check-box for that setting, but it didn't do anything I expected or was hoping ... what does it do ?
Just getting back to LBX, so I hope to learn more.
|
horiz checkbox means you move mouse side to side to alter control parameter, not up down.
Ah- horizontal only works on knob/slider controls (as in control type) at moment (well it should anyway) - will update so it works also with cycle controls.
Does it work for you on normal knob/slider controls?
|
|
|
03-17-2017, 04:29 PM
|
#2624
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Update adds horizontal control of cycle controls now (if horiz flag set for cycle control).
RJ,
I've not noticed any issues with graphics label being italic for a non italic font. Some fonts are default italic - are you sure it's not one of these. Could you please provide a screenshot showing the text label and the settings for the label.
Cheers,
|
|
|
03-17-2017, 11:11 PM
|
#2625
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
Quote:
Originally Posted by lb0
horiz checkbox means you move mouse side to side to alter control parameter, not up down.
Ah- horizontal only works on knob/slider controls (as in control type) at moment (well it should anyway) - will update so it works also with cycle controls.
Does it work for you on normal knob/slider controls?
|
I think I caused confusion ... I was thinking that a 'vertical' slider could transform into a horizontal one. [might be hitting KnobMan for this] :|
I'll double check the font thing.
Another question, if I may ... in the Cycle window is a setting for the number of steps. For one of my knobs, I wanted 1/4dB stepping ... this meant setting = 81. Another knob needed 100 steps [different max/min gains]. To set this, I had to mouse-click 81-100 times. It'd be much easier to have an Edit Box function to enter a value.
Thx for considering or even a better solution !
Tonite I built out a full Mastering EQ [using N-4], comprised of 9 Neb-4s instances.
I used it on a Live concert Mastering session. LBX provided a wonderful working experience tuning this project. This is my first, full out EQ with LBX. After several pre-attempts, building this one came together fairly quick.
I'm still a novice to many of the newer features that have been added ... one thing I'd like to know/explore:
1. Since EQ bands can be similar in controls [Freq, Q, Gain, etc] ... is there a way to build a single band, and then copy/paste additional bands that could then be assigned to a specific plugin? I know there would be some special customizing of settings [based on the preset], and some bands might have different controls available. I'm just looking to see if I'm overlooking some construction features. Curious.
Thanks again !!!
|
|
|
03-18-2017, 01:53 AM
|
#2626
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by RJHollins
I think I caused confusion ... I was thinking that a 'vertical' slider could transform into a horizontal one. [might be hitting KnobMan for this] :|
I'll double check the font thing.
Another question, if I may ... in the Cycle window is a setting for the number of steps. For one of my knobs, I wanted 1/4dB stepping ... this meant setting = 81. Another knob needed 100 steps [different max/min gains]. To set this, I had to mouse-click 81-100 times. It'd be much easier to have an Edit Box function to enter a value.
Thx for considering or even a better solution !
Tonite I built out a full Mastering EQ [using N-4], comprised of 9 Neb-4s instances.
I used it on a Live concert Mastering session. LBX provided a wonderful working experience tuning this project. This is my first, full out EQ with LBX. After several pre-attempts, building this one came together fairly quick.
I'm still a novice to many of the newer features that have been added ... one thing I'd like to know/explore:
1. Since EQ bands can be similar in controls [Freq, Q, Gain, etc] ... is there a way to build a single band, and then copy/paste additional bands that could then be assigned to a specific plugin? I know there would be some special customizing of settings [based on the preset], and some bands might have different controls available. I'm just looking to see if I'm overlooking some construction features. Curious.
Thanks again !!!
|
ctrl-click the States button in cycle control to enter value it's been possible for some time!!
Will look into the other things....
EDIT: technically you can also already do your other request. Create the eq band - highlight the controls in FX PARAM mode - then rigt-click Copy. Then right-click Paste to duplicate the controls. Then just click-and hold on the new Neb instance (top-left FX list) - until the replace FX box appears - then drag this box over the new controls to assign the new instance of N4 to the duplicated controls...
Ah nuts - just creating a licecap for you regarding this - and it's not quite working as I want like that - let me work on it...
In the meantime - you can create a single band - then SAVE STRIP - and drag this strip in for each additional band. This way loads N4 for you as well. Then all you need to do is alter the preset within N4 instance to the required band. That should be pretty quick - and the single band N4 strip can be used for all Neb eq bands in the future (you could save it as a favourite strip for quick adding too)...
free upload pictures
EDIT2:
This next licecap shows as before how to copy using strips - but using blank nebula instance (only got Neb3 on my dev laptop - but works same for any plugin). Also shows using duplicate function - then individually dragging controls from a new plugin and replacing the old ones (but the controls setup does not change - so you don't need to redo all this. Using this method allows you to quickly bring up bands from plugins that may have different controls (or Neb bands that have different param assignments) etc. It should be pretty quick when you get used to it.
The only thing you'd need to consider is if the duplicated/saved control is a cycle control - you would need to redo the cycle control setup for the new parameters if their ranges are different to the copied one.
picture sharing
Last edited by lb0; 03-18-2017 at 06:51 AM.
|
|
|
03-18-2017, 07:29 AM
|
#2627
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
Thanks for the Tut vids !!!
Totally gonna change how I build the next model.
FANTASTIC
|
|
|
03-19-2017, 03:05 AM
|
#2628
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Experimental update
Added REL (relative) button to macro controls. Hopefully this gets somewhere close to what a few have asked for. It's experimental at the moment as it's not completely finished - but it is working. I still need to disable controls that currently have no meaning in relative mode (slider A, and shape - not sure if it will be possible to add a transfer shape to relative mode at the moment - so it is fixed in linear).
Slider B is used to adjust the total distance the relative adjustments can travel. INV works to inverse the direction the adjustments are made. BI is not used in relative mode.
I will try to iron out any issues in the coming week.
Sorry I've not been completely on it the last few weeks, had a very busy time at work, alongside the sad death of my wonderful father-in-law, and my wife spending half the week very poorly in hospital (she's doing better now thankfully). So I've been somewhat preoccupied with other things.
After this week (including the funeral) - I'll be back on it properly I hope.
|
|
|
03-19-2017, 03:52 AM
|
#2629
|
Human being with feelings
Join Date: Jul 2012
Location: Netherlands
Posts: 5,247
|
Thats awfully sad news.
Take all the time you need, and i wish you and your wife much strength in these dark times for you and your wife.
|
|
|
03-19-2017, 05:46 AM
|
#2630
|
Human being with feelings
Join Date: Nov 2015
Location: Germany
Posts: 1,016
|
So do I^^^.
Take your time.
|
|
|
03-19-2017, 08:15 AM
|
#2631
|
Human being with feelings
Join Date: Dec 2009
Posts: 543
|
so sorry to hear that Leon, my best wishes for you and your family.
You will get through it, but don't hurry and take the time to process it properly. That's all I can say.
Thanks a lot for the update regarding macros. Will test soon. Much appreciated.
|
|
|
03-19-2017, 11:59 AM
|
#2632
|
Human being with feelings
Join Date: Mar 2011
Posts: 64
|
Best wishes, take care of yourself and your close ones. Everything else is secondary. Thanks for your hard work.
Question to everyone: how do you upload new knobs and faders to Stripper? Graphics work but I can't figure how to get knobs.
|
|
|
03-19-2017, 12:22 PM
|
#2633
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Quote:
Originally Posted by saastara
Best wishes, take care of yourself and your close ones. Everything else is secondary. Thanks for your hard work.
Question to everyone: how do you upload new knobs and faders to Stripper? Graphics work but I can't figure how to get knobs.
|
Thanks everyone for your support! Things are ok, just wanted to explain why I've been a bit less active over the past week or so.
saastara - Take a look in the controls folder - each knob graphics file requires a .knb file which is a text file containing a few simple parameters which need to be set up for the knob stack to be parsed correctly by Stripper.
Just open any .knb file in notepad or similar. To add a new control - I just copy any .knb file and edit it for the new control (it should have the same name as the graphic file except for the extension.
The parameters are - filename (name of knob image file), cellh = height in pixels of a single frame, frames = number of frames, control type = used to categorize the control into knobs/sliders, buttons, meters etc. You can set the control type within Stripper.
Hope this helps.
|
|
|
03-19-2017, 02:34 PM
|
#2634
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
sorry to hear that's sad news..
take your time, take care of your family, nothing to hurry here.
my best wishes!
|
|
|
03-19-2017, 05:16 PM
|
#2635
|
Human being with feelings
Join Date: Dec 2011
Posts: 2,167
|
Thoughts and Prayers to You and Family.
|
|
|
03-20-2017, 07:27 AM
|
#2636
|
Human being with feelings
Join Date: Apr 2008
Location: Atlanta
Posts: 2,899
|
I discovered this over at Acustica's site and can't believe I'm just now finding out about it considering when this thread was started. Someone said "best script ever" and I wholly have to agree. Thank you! And best to you and your family.
|
|
|
03-20-2017, 08:35 AM
|
#2637
|
Human being with feelings
Join Date: Mar 2016
Location: Victoria, BC
Posts: 198
|
Just discovered this today, totally fantastic, lb0, thank you and all the best to you!
|
|
|
03-20-2017, 09:09 AM
|
#2638
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
|
|
|
03-20-2017, 10:49 AM
|
#2639
|
Human being with feelings
Join Date: Apr 2014
Posts: 4,175
|
Thanks everyone for your support and enthusiasm for the project!
And thanks as always Timbral... Have downloaded and will check out tonight.
I've also got somewhere towards making a strip file (as saved by the SAVE STRIP button) - truly portable - allowing it to be exported into a single file containing all the data, graphics, controls, knb files
Also got it importing ok in my quick tests - so it places controls/knb files in correct folder, and adds the strip file to the current strip folder...
Still lots of testing to do before release.
Also - got relative mode in macros to work with the transform functions. But I think I need to rewrite this a little - but getting there.
Cheers.
|
|
|
03-20-2017, 12:34 PM
|
#2640
|
Human being with feelings
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
|
yay!
"portable" sounds highly helpful!!
EDIT:
sometimes mouse wheel stops the working here, seems Subset List is the reason..
needs to close & re open the stripper window to start to work again.
(nothing urgent!)
Last edited by timbralzoom; 03-25-2017 at 06:57 AM.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 02:56 PM.
|