|
|
|
05-18-2020, 12:13 AM
|
#521
|
Human being with feelings
Join Date: Dec 2014
Location: Ruhr Area, Germany
Posts: 977
|
Quote:
Originally Posted by TheM
how it is possible that Windows still can control audio signal between Audio device and DAW?
|
ASIO drivers are usually only used in a DAW under Windows ... macOS is a different story, which I talked about in your quote above.
When I was still a Windows user, I had a Tascam interface, that came with 2 drivers, a normal audio driver for Windows sounds, Youtube, etc. and a second driver, the ASIO driver, that could only be chosen in a DAW. When I used the standard Tascam driver in a DAW, I had bad latency issues. Nevertheless it was possible to use both drivers in parallel, e.g. stopping Reaper's playback (ASIO driver) and starting a Youtube video.
It might be helpful, if you explain, what exactly is your problem with the ASIO driver you are using ... which audio interface, driver version, Windows version?
__________________
Greetings from Germany
Chris
Last edited by Aymara; 05-18-2020 at 12:19 AM.
|
|
|
05-28-2020, 10:11 PM
|
#522
|
Human being with feelings
Join Date: Dec 2015
Posts: 5
|
Zoom U-24 works fine in Reaper. I'm in Windows 10.
|
|
|
06-17-2020, 05:34 PM
|
#523
|
Human being with feelings
Join Date: Apr 2020
Posts: 18
|
Behringer XR-18
I hope this isn't unnecessarily redundant.
I know that it was already posted as working, but I figured I'd clarify: with Behringer's Windows 10 ASIO driver, the XR-18 sends 18 channels / receives 18 channels via USB on Reaper 6. (ASIO 4 All did not work for me.)
|
|
|
07-01-2020, 03:18 AM
|
#524
|
Human being with feelings
Join Date: May 2020
Posts: 37
|
Quote:
Originally Posted by Sweet Wind
Zoom U-24 works fine in Reaper. I'm in Windows 10.
|
Yep. Win 10 here also and my Zoom U-44 interface works fine.
The Zoom H6 recorder also works fine in both Stereo and Multi-channel interface modes.
|
|
|
07-06-2020, 10:44 AM
|
#525
|
Human being with feelings
Join Date: Sep 2018
Location: Denmark
Posts: 6
|
Zoom R24
8 in and 2 out, works fine as soundcard, and also as controller.
In order to make it work as a win daw interface, I downloaded a zoom asio driver at
Zoom’s software page, (asio 4 all only works with 2 ch)
Regards from Denmark
Last edited by Jens K; 07-06-2020 at 10:40 PM.
|
|
|
07-17-2020, 10:51 PM
|
#526
|
Human being with feelings
Join Date: Jun 2008
Location: South
Posts: 1,211
|
old TERRATEC Phase 88 Rack FW
Last month i bought for cheap an old but great TERRATEC Phase 88 Rack FW device, sounds much better than a lot of named garbage they sell these days!!
Works on:
Win XP
Win XP64
Win 7 32 bit
|
|
|
07-18-2020, 12:11 AM
|
#527
|
Mortal
Join Date: Jan 2006
Location: Wickenburg, Arizona
Posts: 14,047
|
What ever happened to them? I heard they may have bought a gaming hardware company
|
|
|
09-20-2020, 02:47 PM
|
#528
|
Human being with feelings
Join Date: Sep 2020
Posts: 1
|
Soundblaster Audigy SB0090 not working with Mixer
I'm using Reaper 5.0 & my EM-U1212m is starting to go so I picked up a Soundblaster Audigy SB0090. I ran the "In" to "In" & "Out" to "Out" set all up in Windows 8.1 "Sound Mixer" but no matter what I can't get it to work with my 12 channel "Analog Mixer" no matter what I set in "Reaper" for "Input" & "Output".
I downloaded the trail of the newest "Reaper" which has "Shared Loopback" & that works for streaming audio but my "Mic", "Guitar" ect. when armed in "Reaper" does not show any signal. I tried my "Onboard" sound & works prefect but has noise.
I know the KX Project 3552 drivers/mixer is just as confusing as the EM-U for routing (which in the new "Reaper" no longer shows "AUX L" & "AUX R") & I have no clue how to re-route the signal.
Anyone know why this won't give me signal?
|
|
|
09-20-2020, 07:46 PM
|
#529
|
Human being with feelings
Join Date: Dec 2019
Location: Eastern shore Md, USA
Posts: 79
|
Roland Octo
Roland Octacapture 8ch..... with latest Asio4all...wrkn fine for my band recording needs.
Last edited by StrumminSteve; 09-20-2020 at 07:50 PM.
Reason: Correction
|
|
|
10-03-2020, 07:31 AM
|
#530
|
Human being with feelings
Join Date: Oct 2020
Location: UK
Posts: 2
|
SSL2 interface - Windows 10 Stable
Installed Reaper on Mac Mini at work with 2 x AVID 16x16 Analogue with no issues either. yay
|
|
|
10-03-2020, 09:32 AM
|
#531
|
Human being with feelings
Join Date: Dec 2009
Location: Geelong,Australia
Posts: 509
|
Picked up an IK Multimedia 'irig PRO DUO I/O' to use as a portable rig with my ipad or phone. Have been using it with REAPER on Windows 10 pro x 64 as well.
Works great.
Steve
|
|
|
10-27-2020, 10:10 AM
|
#532
|
Human being with feelings
Join Date: Feb 2017
Location: New York (Long Island)
Posts: 206
|
I use Saffire6 USB..works but latency
I use a Focusrite Saffire6 USB..works but latency is bad,imho. No matter what I do 11mSec latency is the best i can get on my PC with 8 cores and 3.2 GHz CPU
|
|
|
10-27-2020, 03:30 PM
|
#533
|
Human being with feelings
Join Date: Aug 2020
Posts: 96
|
Roland Tri-Capture is rock solid for me on Windows 10.
|
|
|
02-10-2021, 03:30 AM
|
#534
|
Human being with feelings
Join Date: Feb 2011
Location: Paris, France
Posts: 431
|
Motu MK3 Utralite Hybrid with Windows 10.
Works like a charm.
__________________
Quitte à choisir, je préférerai avoir plus de talent et moins d'entrées/sorties sur ma carte son.
|
|
|
02-10-2021, 04:25 AM
|
#535
|
Human being with feelings
Join Date: Sep 2017
Location: Cantu' - Italy
Posts: 8
|
Till 10 days ago I used Reaper with M-Audio M-Track (2 channels), without any issue. Now I updated it with a SSL 2+. Installed and tested with Windows 10 and Reaper last release.
Latency 44KHz/128 samples as reported on Reaper bar is:
o Block size: 128; safe mode OFF: 5.4 / 2.5 ms ASIO
o Block size: 128; safe mode ON: 5.4 / 4.5 ms ASIO
Safe mode is an option of SSL2+.
Very happy for the moment.
|
|
|
03-04-2021, 11:51 AM
|
#536
|
Human being with feelings
Join Date: Jun 2009
Location: Germany, Slovenia, Croatia
Posts: 53
|
Focusrite RedNet PCIeR Dante
Lynx Aurora(n) Dante
192 kHz
= Excellent
|
|
|
11-22-2021, 12:21 PM
|
#537
|
Human being with feelings
Join Date: Jun 2008
Location: South
Posts: 1,211
|
Quote:
Originally Posted by pipelineaudio
What ever happened to them? I heard they may have bought a gaming hardware company
|
They got swallowed by another german company , they still produce audio stuff but mostly usb audio cards and similar crap !!
|
|
|
11-22-2021, 12:25 PM
|
#538
|
Human being with feelings
Join Date: Jul 2021
Location: Swiss Zürich
Posts: 813
|
RME
RME Digiface USB
RME Babyface silver
RME Madiface Pro
All fine on M1 Monterey
|
|
|
11-23-2021, 12:41 AM
|
#539
|
Human being with feelings
Join Date: Jan 2009
Location: New Zealand
Posts: 2,905
|
YAMAHA SW1000XG
Grinder
|
|
|
05-23-2022, 10:15 PM
|
#540
|
Human being with feelings
Join Date: May 2017
Posts: 3,202
|
Presonus 1818VSL on Win7 & Linux
|
|
|
05-23-2022, 10:20 PM
|
#541
|
Human being with feelings
Join Date: May 2017
Posts: 3,202
|
Quote:
Originally Posted by hardplay
Last month i bought for cheap an old but great TERRATEC Phase 88 Rack FW device, sounds much better than a lot of named garbage they sell these days!!
Works on:
Win XP
Win XP64
Win 7 32 bit
|
It also works on Win7 64 bit. I have a 64 bit (unofficial) driver for it. Works exactly the same as the 32 bit version did
- very solid. PM me if you'd like a copy.
I still have mine in my system handling my legacy stereo gear (Teac C3 cassette deck, Sony CD player, FM receiver). Though I can still use it directly as I/O, I typically feed the S/PDIF output into my main studio interface for monitoring the Terratec inputs.
Last edited by Philbo King; 05-23-2022 at 10:27 PM.
|
|
|
03-28-2023, 05:56 PM
|
#542
|
Human being with feelings
Join Date: Jan 2007
Location: Underworld
Posts: 1,188
|
I have RME HDSP 9652 PCI audio card on my main computer connected through ADAT and SPDIF with TC Electronic StudioKonnekt 48 which generally works in standalone mode and I control the basic functions through its remote controller. TC serves as AD/DA for RME 9652.
The combination of these two is working great for me and I can use excellent TCs DSP effects and record them in Reaper. I use Debian Linux with REAPER on my main computer and Windows 7 with REAPER on my laptop which is connected to TC SK48 and controls its mixer and all other functions I cannot reach through its remote.
I also use Macbook Pro from 2013 running High Sierra for the same things as my PC laptop. All computers are connected through a TP-Link network switch and NAS computer which serves as a unifying storage for everything.
Here, everything is connected to everything and REAPER shines in that environment with its connectivity abilities. I couldn't get that so easily with other DAWs. Not that it's not impossible...
__________________
Goodnight, thank you, and may your God go with you.
Last edited by DuX; 03-28-2023 at 06:01 PM.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 04:47 PM.
|