Old 03-19-2017, 10:34 PM   #1
DSHODGE
Human being with feelings
 
Join Date: Dec 2015
Posts: 9
Default Reaverb Deconvolve Issue

I've been attempting to use reaverb to create my own reverb Impulse Responses. The issue is when I deconvolve the recorded audio, with the test tone used, I end up with a final IR with a sine sweep audible in any audio sent through it. It is what you might expect if you didn't deconvolve the recorded audio. I have searched for hours on end and I haven't found any solutions. I've tried different sample rates, bit depths and test tone lengths, all with similar, but incorrect results. The 30 second sweep ended up with a 30 second IR that had decent early reflections but they were followed by several seconds of sweeping ambience. The 4 second test tone resulted in decent early reflections followed by a 1/2 note delay with 5 or 6 repeats. Not at all what the reverb actually sounds like. Some one please help, am I missing something? It seems like an issue with the deconvolve process. Could this be a bug?

Running Reaper 5.35 64 bit on Windows 10.0.14393 Dell Inspiron 3847 i7 4790 quad core @ 3.6 GHz with 16GB ddr3 RAM and a motu 16A interface with current drivers and software.

Sorry if this isn't the best place for this thread, but I can't figure out how to delete it now.

Thanks for any help

Last edited by DSHODGE; 03-20-2017 at 12:22 AM. Reason: More info added
DSHODGE is offline   Reply With Quote
Old 07-12-2017, 08:26 AM   #2
farjedi
Human being with feelings
 
Join Date: Sep 2010
Posts: 170
Default

Can't help as I'm looking for information on this subject, but I got bizarre results using it, couldn't hear a sweep just what sounds like a digital synth guitar feeding back. My sound design brain thinks it could be fun to mess around with that. But it's not behaving as it should and I got the same as you, whatever length test tone is the length of the de-convolved IR, which obviously isn't right.

Normally I would just use a spike to make pretty decent IR's but this thing I'm sampling the noise floor is a bit too high so I just wanted to see if a sine sweep deconvolution would help.

There doesn't seem to be much call for deconvolution software, voxengo is the only one I can think of and it's Windows only.
farjedi is offline   Reply With Quote
Old 07-12-2017, 09:02 AM   #3
Bri1
Banned
 
Join Date: Dec 2016
Location: England
Posts: 2,432
Default

TBH-the module just does not seem to work right-whichever way I've gone about it.Inconsistant results-and a severe lack of decent documentation or video tutorials on basic/complex uses.
It works,but it's just strange in practice.
Could do with a massive update {imo} and a decent reainspection from those 'in the know'.
May be put to better use here then I guess...
Bri1 is offline   Reply With Quote
Old 11-02-2017, 09:06 AM   #4
DSHODGE
Human being with feelings
 
Join Date: Dec 2015
Posts: 9
Default Any luck?

Thanks for the replies, I was wondering if either of you have solved this issue or tried again more recently? I'm going to try again, hopefully it's been addressed in the last few updates. If I have any different results, I'll post them here.
DSHODGE is offline   Reply With Quote
Old 11-02-2017, 09:11 AM   #5
karbomusic
Human being with feelings
 
karbomusic's Avatar
 
Join Date: May 2009
Posts: 29,260
Default

I didn't know that ReaVerb can deconvolve. Yes you have to properly deconvovle, I use the one from Voxengo and it can be picky to get it to deconvolve just right - then I loaded that result into ReaVerb.
__________________
Music is what feelings sound like.
karbomusic is offline   Reply With Quote
Old 11-02-2017, 09:23 AM   #6
Xenakios
Human being with feelings
 
Xenakios's Avatar
 
Join Date: Feb 2007
Location: Oulu, Finland
Posts: 8,062
Default

I got it working at first try here, are you guys sure you are doing the whole process right? (Of course the thing that the impulse response is supposed to be coming from has to be unmodulated and not adding any new harmonic content into the sound etc..But those are well known limitations of convolution.)
__________________
I am no longer part of the REAPER community. Please don't contact me with any REAPER-related issues.

Last edited by Xenakios; 11-02-2017 at 09:31 AM.
Xenakios is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.