Old 10-26-2016, 04:31 PM   #521
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by NextLevel View Post
I'm On win Vista.
When I turn on XY locks all controls disappear and dropping a control from the learn box does nothing, when XY is turned back off the control I tried to drop is not there. By the way, how do you delete user created .strip files?
I looked in the strips folder, but I don't see them there.

Thank you for looking into this.
The XY makes everything disappear because they have defaulted to 0.

Ignore this advise and switch them off so surface is whole.

Have you downloaded the latest version and tried that - it might fix your problem.

EDIT: strip files should all be stored in strips folder in the LBXCS_resources folder! are they hidden for some reason? Try showing all files in explorer?
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-26-2016, 04:32 PM   #522
NextLevel
Human being with feelings
 
Join Date: Dec 2014
Posts: 417
Default

Quote:
Originally Posted by lb0 View Post

Would you download the latest version and try again and let me know if it works now?
Downloading now, will be back in a couple of min. with results.
NextLevel is offline   Reply With Quote
Old 10-26-2016, 04:42 PM   #523
hopi
Human being with feelings
 
hopi's Avatar
 
Join Date: Oct 2008
Location: Right Hear
Posts: 15,618
Default

sweet dreams lb0

seem a bugglet in latest version
with the learn function open
it keeps putting the same control in the GUI, even after moving a diff knob on the FX

works as expected to just drag in from list
__________________
...should be fixed for the next build... http://tinyurl.com/cr7o7yl
https://soundcloud.com/hopikiva
hopi is offline   Reply With Quote
Old 10-26-2016, 04:42 PM   #524
RJHollins
Human being with feelings
 
Join Date: Dec 2011
Posts: 2,161
Default

The new 'Displayed Value OFFSET' works like a charm !

[note: I will still post this issue in the Beta forum, and would like to quote the message from lb0 in regards to this.] They will likely acknowledge the issue, but the time frame for fix might fall low-priority, as we are in heavy BETA rotation there, with updates and new releases.

With this new lb0 update, the accuracy is absolutely fine for the important ranges. The extremes [particularly the -192] is not even a factor.

thanks for the new feature !
RJHollins is offline   Reply With Quote
Old 10-26-2016, 04:47 PM   #525
NextLevel
Human being with feelings
 
Join Date: Dec 2014
Posts: 417
Default

Sorry to say, new version did'nt solve the problem.
I did find the .strip files though.
NextLevel is offline   Reply With Quote
Old 10-26-2016, 04:50 PM   #526
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by hopi View Post
sweet dreams lb0

seem a bugglet in latest version
with the learn function open
it keeps putting the same control in the GUI, even after moving a diff knob on the FX

works as expected to just drag in from list
Thanks!

Working fine for me here - pulling in learned params and from the list just fine.

Do you have the latest version? Or is this with the latest version (about 30 mins ago).

DOH -i should read - latest version you already said!!
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-26-2016, 04:52 PM   #527
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Ok - seems a few issues with the learn function to iron out. Will come back to this tomorrow...

If you are able to give me any extra specifics - might be useful - thanks.
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-26-2016, 05:03 PM   #528
NextLevel
Human being with feelings
 
Join Date: Dec 2014
Posts: 417
Default

Quote:
Originally Posted by lb0 View Post
Ok - seems a few issues with the learn function to iron out. Will come back to this tomorrow...

If you are able to give me any extra specifics - might be useful - thanks.
Yeah this can wait till later, go get some sleep.

I did notice something else;
If there is no param. selected in the list, dragging from the learn box drops the first param from the list, however if a different param. such as 3 is selected then dragging from learn inserts the one that is selected, but still not the actual one that was learned.

Have a good night.
NextLevel is offline   Reply With Quote
Old 10-26-2016, 06:01 PM   #529
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

Open Fx Window.. Beautiful!
thank you.
Have a good night
timbralzoom is offline   Reply With Quote
Old 10-26-2016, 06:26 PM   #530
RJHollins
Human being with feelings
 
Join Date: Dec 2011
Posts: 2,161
Default

oh this RT KliK open FX is really nice !

thx
RJHollins is offline   Reply With Quote
Old 10-26-2016, 11:41 PM   #531
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by NextLevel View Post
Yeah this can wait till later, go get some sleep.

I did notice something else;
If there is no param. selected in the list, dragging from the learn box drops the first param from the list, however if a different param. such as 3 is selected then dragging from learn inserts the one that is selected, but still not the actual one that was learned.

Have a good night.
Amazing what a sleep can do. Just found another glaring mistake when adding the parameter from the learn box that I'm sure would be causing your problem.

Please try the latest version.

In all my testing (not good testing in this case)- I've only been dragging in parameters from different tracks to the selected one (as this was one of the main use cases for the learn function). I hadn't thought to check it with parameters from the same track as is selected!! I'm a complete idiot sometimes!! heh.

Anyway - I've got my fingers crossed...
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 04:12 AM   #532
NextLevel
Human being with feelings
 
Join Date: Dec 2014
Posts: 417
Default

lb0,

Excellent job, it's working now!

Thank you
NextLevel is offline   Reply With Quote
Old 10-27-2016, 04:25 AM   #533
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by NextLevel View Post
lb0,

Excellent job, it's working now!

Thank you
No worries - glad we've got to the bottom of it. Sorry for wasting your time last night - I was a bit tired and didn't spot my glaring error :/
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 04:46 AM   #534
NextLevel
Human being with feelings
 
Join Date: Dec 2014
Posts: 417
Default

Quote:
Originally Posted by lb0 View Post
No worries - glad we've got to the bottom of it. Sorry for wasting your time last night - I was a bit tired and didn't spot my glaring error :/
Not a waste at all. I'm just so glad this wonderful tool exists and I'm more then willing to help in bug squishing.

One question, are there any plans for adding item fx support?
NextLevel is offline   Reply With Quote
Old 10-27-2016, 06:11 AM   #535
hopi
Human being with feelings
 
hopi's Avatar
 
Join Date: Oct 2008
Location: Right Hear
Posts: 15,618
Default

Nice shot lb0 L working as it should now... thanks so much

it really is a great help, especially with some FX that give obscure names to their functions

one niggle idea for it... right now to get out of learn mode we hit the L again... [correct?] wonder if a rt clk on the learn window could be another way to close it? Just a thought..
__________________
...should be fixed for the next build... http://tinyurl.com/cr7o7yl
https://soundcloud.com/hopikiva
hopi is offline   Reply With Quote
Old 10-27-2016, 06:43 AM   #536
Vincent Sermonne
Petit manitou
 
Vincent Sermonne's Avatar
 
Join Date: Feb 2009
Location: Gémenos France
Posts: 7,347
Default Double click

Does Double-click to return to the default value could be integrated? This will be very useful and in line with Reaper!
__________________
Vincent
http://www.tchackpoum.fr
Vincent Sermonne is offline   Reply With Quote
Old 10-27-2016, 06:47 AM   #537
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by Vincent Sermonne View Post
Does Double-click to return to the default value could be integrated? This will be very useful and in line with Reaper!
At the moment Ctrl-click. I could probably do double-click - but it's more logic.
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 06:50 AM   #538
Vincent Sermonne
Petit manitou
 
Vincent Sermonne's Avatar
 
Join Date: Feb 2009
Location: Gémenos France
Posts: 7,347
Default

Quote:
Originally Posted by lb0 View Post
At the moment Ctrl-click. I could probably do double-click - but it's more logic.
waaaa ! again, I discovered !!
__________________
Vincent
http://www.tchackpoum.fr
Vincent Sermonne is offline   Reply With Quote
Old 10-27-2016, 07:48 AM   #539
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

https://snag.gy/8DCYuM.jpg


not the best take but anyway..
https://www.youtube.com/watch?v=X6J4au3RaBs
timbralzoom is offline   Reply With Quote
Old 10-27-2016, 08:54 AM   #540
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by timbralzoom View Post
Brilliant once again!
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 08:56 AM   #541
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

New update - includes right-click on learn window to close.

Also added Range knobs to adjust working range of controls. Say you only ever want -6 to 6 db of gain boost on your fav eq - easy now

+minor bug fixes

Still plan to allow you to increase the max value - so you can access the extra 6db on certain Rea* plug controls.
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 08:58 AM   #542
hopi
Human being with feelings
 
hopi's Avatar
 
Join Date: Oct 2008
Location: Right Hear
Posts: 15,618
Default

just to say, Cntrl Clk is the standard way in almost all plugins to return to the center of the knob or slider..

reapers dbl clk on stuff is handy but not normal as far as FX's go...

what will today bring? %^)
__________________
...should be fixed for the next build... http://tinyurl.com/cr7o7yl
https://soundcloud.com/hopikiva
hopi is offline   Reply With Quote
Old 10-27-2016, 09:42 AM   #543
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by hopi View Post
just to say, Cntrl Clk is the standard way in almost all plugins to return to the center of the knob or slider..

reapers dbl clk on stuff is handy but not normal as far as FX's go...

what will today bring? %^)
yeah - i know how to do double-click, but it's more hassle until I absolutely run out of other easy modifiers.

I've noticed (especially with Rea* plugs) that often things like 0 gain on the EQ do not point straight up since I did the normalize update. If you really must have them straight up - you can use the range knobs to ensure 0 is up. Eg. on ReaEQ - you need to limit the maximum to 6db. I don't really understand all these strange log scales that ReaEQ et all use - so this is the best I can do.

Other VST EQ's (Melda, Acon etc) all seem to work fine - as their ranges are normally +-X db (ie. the same amount of boost as cut available).
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 10:42 AM   #544
RJHollins
Human being with feelings
 
Join Date: Dec 2011
Posts: 2,161
Default

latest version testing and working well ...

note: I did have to reset the 'display value offset'. The -6 over ride I had, became -12 [on the LBX GUI only, VST was still at 0] ... I re-did the offset.

Save/re-loaded .... working!
RJHollins is offline   Reply With Quote
Old 10-27-2016, 10:57 AM   #545
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by RJHollins View Post
latest version testing and working well ...

note: I did have to reset the 'display value offset'. The -6 over ride I had, became -12 [on the LBX GUI only, VST was still at 0] ... I re-did the offset.

Save/re-loaded .... working!
ok - will keep an eye out for display offset bug
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 11:30 AM   #546
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Just a note - I think changing the range of a control will play havoc with any cycle button settings if the control is a cycle button type. But I guess there's normally no need to set the range for a cycle button. I could fix this but really I need to change storing the normalized values and instead store the denormalized values... Something for a rainy day eh??!
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 01:03 PM   #547
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

This update includes Memory Button control type - RJ's request (if I understood correctly)

Basically this button when activated - switches the target parameters value to the default value for the button control. But when deactivated - it switches back to the previous value. If you change the parameter before switching back - it will deactivate...

Use with 2 frame on/off type knobs. Works well with hopi's lovely light up leds, as well as my flat yellow circle buttons.

Hopefully I've understood you correctly RJ . Let me know if it needs tweaking.

Let me know of any quirks or bugs with it - or indeed anything else...

Cheers,
L.

Also added - but thinking of improving: Right-click on defval slider in ctl options to set defval to current parameters value. Only down side is you need to switch between Live and Edit modes to change the parameter value if it's not in the right place (or you could just set it in teh plugin window i guess).

EDIT: Boring video of the new button type: https://youtu.be/ODwtVVWdj5o
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website

Last edited by lb0; 10-27-2016 at 01:07 PM. Reason: confused explanation
lb0 is offline   Reply With Quote
Old 10-27-2016, 01:11 PM   #548
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Hold fire on updating - Spotted a glitch with saved strips - gonna try and fix.

FIXED - I think - update away...
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 03:57 PM   #549
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Mem button improvement. Ctrl-click the memory button to set its defval (ie. jump to value) to current value of parameter.
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-27-2016, 04:07 PM   #550
hopi
Human being with feelings
 
hopi's Avatar
 
Join Date: Oct 2008
Location: Right Hear
Posts: 15,618
Default

* ... just to say I wasn't saying rt clk to set a knob to it's default should be added... was saying cntrl clk is normal and fine with me...

I do have a question though:

Ok I save a strip, give it a name [we have to do that right?]
OK then make a few changes to it.. and save it again... now I'm again asked to give it a name... I don't understand this... would think if that strip is the currently selected strip, SAVE STRIP would just re-save to it...

can anyone clear me up on how all this is intended to work?
__________________
...should be fixed for the next build... http://tinyurl.com/cr7o7yl
https://soundcloud.com/hopikiva
hopi is offline   Reply With Quote
Old 10-27-2016, 05:08 PM   #551
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

Thank you!
here is new one..
https://www.youtube.com/watch?v=7Dq_ea4-RYY

i was trying to capture snapshots via action
(Automation: Write current values for all writing envelopes to time selection)

the thing is:
moving controls and adding to time line as automation (Latch Preview mode)
was fine in whole project

then i switch automation mode to read to listen if they work properly
then tried to switching again
latch preview mode to change a few parameters in some locations
but none of the knobs was moving anymore...
also tried in other write- touch and latch ... no luck.
they moves only in global bypass all envelopes mode
but i couldn't find the way to write that positions to envelopes...

is this is normal / expected behavior ?


edit..
this Latch Preview thing very new to me..
so just being to be sure
i tried in an empty project just one microtonic without using stripper
seems moving parameters from plugin's interface and from envelope lines works with no problem.

again sorry if i push to wrong direction unnecessarily.

edit2..
forgot to say i didn't update to latest one (using one version earlier.. from yesterday)

Last edited by timbralzoom; 10-27-2016 at 05:21 PM.
timbralzoom is offline   Reply With Quote
Old 10-27-2016, 06:53 PM   #552
RJHollins
Human being with feelings
 
Join Date: Dec 2011
Posts: 2,161
Default

Quote:
Originally Posted by lb0 View Post
Mem button improvement. Ctrl-click the memory button to set its defval (ie. jump to value) to current value of parameter.
Oooooowww .... MEM Button. So very nice

more testing tonite
RJHollins is offline   Reply With Quote
Old 10-27-2016, 07:09 PM   #553
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

last for tonight..time to test what the MEM button is
https://www.youtube.com/watch?v=e4yGUN0nB40
timbralzoom is offline   Reply With Quote
Old 10-27-2016, 10:42 PM   #554
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

installed latest one and tested more about the automation mode issue that i try to describe above and i found you need to keep open all envelope lines if you switch
"Envelope: Toggle show all active envelopes for all tracks"
to off once,
knobs not moving anymore,
only way is re loading project without save!

i don't know if its just because of the Reaper's automation logic...
if so, sorry and please just ignore my report!


..as always Thank you so much for creating this beauty!
timbralzoom is offline   Reply With Quote
Old 10-27-2016, 11:57 PM   #555
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by timbralzoom View Post
installed latest one and tested more about the automation mode issue that i try to describe above and i found you need to keep open all envelope lines if you switch
"Envelope: Toggle show all active envelopes for all tracks"
to off once,
knobs not moving anymore,
only way is re loading project without save!

i don't know if its just because of the Reaper's automation logic...
if so, sorry and please just ignore my report!


..as always Thank you so much for creating this beauty!
Yeah - I've found some odd behaviour using envelopes and Latch Preview with Chaos engine. I think what's meant to happen is that if you have a automation envelope recorded - in LP mode - it follows the envelope until you adjust a knob for that parameter - then it follows your knob movements instead. not sure it always does this as expected.... will need to remind myself what happens though...

EDIT: I'm not really doing anything special in stripper apart from sending and receiving parameter automation. I would say any odd behaviour is probably external. (but will try out see if i have the same issue).
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website

Last edited by lb0; 10-28-2016 at 12:11 AM.
lb0 is offline   Reply With Quote
Old 10-28-2016, 12:22 AM   #556
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

That was fast..
Good morning!
if there is no solution, i can live with keeping envelopes always open happily.
timbralzoom is offline   Reply With Quote
Old 10-28-2016, 12:26 AM   #557
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by hopi View Post
* ... just to say I wasn't saying rt clk to set a knob to it's default should be added... was saying cntrl clk is normal and fine with me...

I do have a question though:

Ok I save a strip, give it a name [we have to do that right?]
OK then make a few changes to it.. and save it again... now I'm again asked to give it a name... I don't understand this... would think if that strip is the currently selected strip, SAVE STRIP would just re-save to it...

can anyone clear me up on how all this is intended to work?
The main issue here is that i haven't prepopulated the save strip box with current strip name. Thing is - you could pull many individual plug strips into one multi plug strip - then you've loaded several strips into one tracks grid - so which does the script offer to save as (when in truth - you probably want to save it as a completely new strip anyway). This was how i envisioned it being used. You created strips for all your favourite plugins - eq,s comps, reverbs etc. Each of these you would save as it's own strip. Then you can use these fx component strips and drag them into a blank track to create a multi plug strip - once you like what you've got - you can save as a complete channel strip. Barely any dragging in of individual parameters anymore...

Of course, as Timbral and others have shown - you can use it in entirely different ways too...
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-28-2016, 02:21 AM   #558
timbralzoom
Human being with feelings
 
timbralzoom's Avatar
 
Join Date: Apr 2010
Location: Turkey/Istanbul
Posts: 1,820
Default

Thank you so much! TBProAudio!

timbralzoom is offline   Reply With Quote
Old 10-28-2016, 03:24 AM   #559
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

Quote:
Originally Posted by timbralzoom View Post
Thank you so much! TBProAudio!

Very nice

And I've cracked a big usability issue I had - We will have type in value input very soon
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website
lb0 is offline   Reply With Quote
Old 10-28-2016, 04:24 AM   #560
lb0
Human being with feelings
 
Join Date: Apr 2014
Posts: 4,171
Default

New update.

~Added double-click (yes double-click - I bothered to work it out ) - but not for default value - instead to open Edit Value box.

Should work for all controls that contain a numeric value as part of their displayed value. If there is no numeric part - or you type in a non-numeric value - it will do nothing.

I can swap the double-click action to do default value if people prefer, and swap the Edit Value box to Ctrl-click. Whatever the general consensus is.

Hopefully it works in all situations for you. It has in my testing.

Please note - it works by setting the parameter by cycling through 0-1 - reading param display value - then as soon as it hits a returned value > required value - it switches back to previous value less than - and works on the next decimal place (for the normalized value). Keeps doing this until it matches the value or runs out of decimal places (I've limited it to 50 at the moment) If it can't exactly match the value - it returns closest match. Normally the limiting factor is the plugin - which won't allow every value between x and y, so if the value is available - you can set it.

If you are running audio when doing this - you may get very tiny audio artifacts as it sweeps the values - but I've not noticed anything in my tests as it runs very very fast.

EDIT: probably need to tweak it for when display offset values are set.

EDIT2: tweaked and updated to work when display offset values are set for a control.
__________________
Projects - Reascripts - Lua:
Smart Knobs 2 | LBX Stripper | LBX Floating FX Positioner
Donate via Paypal | LBX Tools Website

Last edited by lb0; 10-28-2016 at 04:40 AM.
lb0 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.