v5.71pre4a - January 1 2018

[vanhaze]

OSX 10.13.2
Tyrell VSTi v 3.03
Reaper 5.71pre4a

- Midi Item, driving Tyrell VSTi, the Midi item is played, with Transport-Repeat ON.
- Now, Execute the Action "Item: Duplicate Item"

Outcome: instant note hangs in Tyrell VSTi.

Someone can confirm this on OSX ?

[fundorin]

Originally Posted by EvilDragon

Adjust theme colors for odd/even track background.

Might be handy to have a dedicated checkbox for this in preferences - "invert accents for track background", so it won't be needed to adjust each used theme manually for everybody. Same for the MIDI editor.

https://i.imgur.com/JqHXBGR.png

[vitalker]

Originally Posted by EvilDragon

It does look good. I think both horizontal and vertical checkering at the same time would look way too confusing, personally.

I suppose 4 independent colors would solve the issue.
Example:

[Giovanni_B]

Originally Posted by fundorin

Might be handy to have a dedicated checkbox for this in preferences - "invert accents for track background", so it won't be needed to adjust each used theme manually for everybody. Same for the MIDI editor.

https://i.imgur.com/JqHXBGR.png

+1 to this and to the optional measure for the patterns (1, 2, 3, 4 bars, etc)

[fundorin]

Originally Posted by vitalker

I suppose 4 independent colors would solve the issue.

Not colors, but global tinting level in range -5 - +5.

[vitalker]

Originally Posted by fundorin

Not colors, but global tinting level in range -5 - +5.

Tinting of what?

[EvilDragon]

Originally Posted by fundorin

Might be handy to have a dedicated checkbox for this in preferences - "invert accents for track background", so it won't be needed to adjust each used theme manually for everybody. Same for the MIDI editor.

https://i.imgur.com/JqHXBGR.png

It DOES invert colors as is. You just need to have them defined so they're somewhat different. The no-track arrange area is a separate color which is a new one.

[fundorin]

Originally Posted by vitalker

Tinting of what?

Both horizontal and vertical line accents. No need to use 4 different colors.
Just a single parameter for odd H lines and another one for odd V lines in both arrange and midi editor. The cross lined checkers should blend naturally.
If you're confused by the word "tinting", you may use words like "opacity", "contrast", "gamma" or "saturation", instead.

[fundorin]

Originally Posted by EvilDragon

It DOES invert colors as is. You just need to have them defined so they're somewhat different. The no-track arrange area is a separate color which is a new one.

As far as I can see, all of the examples here, featuring different themes, follow the same path: accents become BW, figuratively, for no-track and WB for track lanes.

[Luster]

vitalker's example above is perfect. This is the way it should look like.

[vitalker]

Originally Posted by fundorin

Both horizontal and vertical line accents. No need to use 4 different colors.
Just a single parameter for odd H lines and another one for odd V lines in both arrange and midi editor. The cross lined checkers should blend naturally.
If you're confused by the word "tinting", you may use words like "opacity", "contrast", "gamma" or "saturation", instead.

But theme uses colors for that... What colors should it use then?
What lines are you speaking about?
No, I'm not confused by this word at all.

[lachrimae]

Originally Posted by fundorin

As far as I can see, all of the examples here, featuring different themes, follow the same path: accents become BW, figuratively, for no-track and WB for track lanes.

I'm finding that if the Arrange View Vertical Grid Shading is lighter than the Track Background color(s), it will be the inverse (WB/BW)... but if it's darker than the Track Background color(s) is will maintain the same alternating pattern (WB/WB):

[nofish]

Originally Posted by Edgemeal

# Grid: fix disappearing gridlines/hang bug [p=1933010]

Maybe an occasion to fix similar ME grid bug too ? (not a regression)
https://forum.cockos.com/showthread.php?t=115425

[ashcat_lt]

Originally Posted by Edgemeal

+ FX: ensure no feedback loop created when building multichannel routing on a folder [t=201177]

How does this work? I spose I could download and try it, but... Did it just revert to what was mentioned in the thread where parent send is turned off for the new children and they send directly to the master?

[EvilDragon]

Originally Posted by Luster

vitalker's example above is perfect. This is the way it should look like.

I find it too confusing/distracting...

[vitalker]

Originally Posted by EvilDragon

I find it too confusing/distracting...

It's just an example. It would be useful, when we could edit all these colors.

[fundorin]

Originally Posted by vitalker

But theme uses colors for that... What colors should it use then?

What colors are they using now for coloring odd and even measure lines in no-track area, when the checkbox is set?

Originally Posted by vitalker

What lines are you speaking about?

Measure lines.

Originally Posted by vitalker

It's just an example. It would be useful, when we could edit all these colors.

This would only be visible if the item names are displayed above the items, like in your setup.

[ferropop]

If we're talking tinting...

Please add option for Tint Selected Track in arranger. The TCP is already tinted when you select a track - can the entire track horizontally into the arrangement be tinted?

With 4K monitors and a billion tracks, dragging a sample into the arrangement is currently a guessing game.

[fundorin]

pre5!

[Justin]

Originally Posted by HighVoltage

# Live FX multiprocessing: fix deadlock with feedback routing

I have narrowed it down to this atached project. I used ReaFIR only so it's self-contained.
The problem is much more present when using multiple kinds of VST plugins.

Now that i removed most of the tracks and plugins, it's a bit harder to freeze Reaper, but it can be done in less then 30 seconds.

I have a shortcut key for "Go to start of loop" and i press play and just spam the key. Literally just holding it down so Reaper retriggers the start of the loop, so the crash occurs faster. It usually freezes here in 6-8 seconds. But it freezes every time.

Record should be ON for the MIDI titled channel.


WIN10 64bit

Addendum:
The tracks don't have to be in a folder either.

Thanks, duplicated, working on a fix now (but it's tricky).

[dupont]

Originally Posted by vanhaze

OSX 10.13.2
Tyrell VSTi v 3.03
Reaper 5.71pre4a

- Midi Item, driving Tyrell VSTi, the Midi item is played, with Transport-Repeat ON.
- Now, Execute the Action "Item: Duplicate Item"

Outcome: instant note hangs in Tyrell VSTi.

Someone can confirm this on OSX ?

No issue here on OSX 10.11.6.

Edit : I noticed a micro audio glitch when cmd+D : duplicate item.

[dupont]

Originally Posted by dupont

After 1 hour of trial, it seems the hanging note issue is fixed, at last for Tyrell N6 vst.
That's a good news.

Spoke to fast.
Still happens but more frequently if loop if less than 2 bars.