Attention Required: Crazy Bug with trim items to selected area action

svijayrathinam · 07-17-2019, 01:10 PM

Hello Developers,

The action "trim items to selected area" doesn't work as expected. It leaves bits and pieces outside the selected area. Pls watch the video below.

https://youtu.be/lf9oY9W4Q7M

svijayrathinam · 07-18-2019, 06:26 AM

Any one ? Pls help ?

schwa · 07-18-2019, 06:46 AM

I'm not able to reproduce that. It's hard to read anything on the screencap, you are running the factory action "Item: Trim items to selected area" ?

svijayrathinam · 07-18-2019, 07:11 AM

Yes...I am running the native action..

svijayrathinam · 07-18-2019, 07:12 AM

Would you like me to send you my reaper.ini file ? would that help to figure out what's going on ?

schwa · 07-18-2019, 07:25 AM

Yes, sending a small .rpp and the .ini file would be helpful.

svijayrathinam · 07-18-2019, 07:34 AM

Here is a link to the ini file and the project

https://drive.google.com/open?id=16T...PfR5DUMjhB1XaY

schwa · 07-18-2019, 08:00 AM

Thanks, we've identified the problem! Can you confirm the action works as expected if the time selection is much earlier in the project, like prior to 3 hours in?

svijayrathinam · 07-18-2019, 08:21 AM

No..I just checked..It doesn't work as expected anywhere in the project

svijayrathinam · 07-22-2019, 03:13 PM

can this be fixed pls ?

schwa · 07-28-2019, 12:09 PM

Would you mind checking if it's fixed in the current development build (v5.981+dev0724) ?

svijayrathinam · 07-29-2019, 03:05 PM

Quote:

Originally Posted by schwa

Would you mind checking if it's fixed in the current development build (v5.981+dev0724) ?

Thank you. Will Check and revert back..

07-17-2019, 01:10 PM	#1
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	Attention Required: Crazy Bug with trim items to selected area action Hello Developers, The action "trim items to selected area" doesn't work as expected. It leaves bits and pieces outside the selected area. Pls watch the video below. https://youtu.be/lf9oY9W4Q7M

07-18-2019, 06:26 AM	#2
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	Any one ? Pls help ?

07-18-2019, 06:46 AM	#3
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,797	I'm not able to reproduce that. It's hard to read anything on the screencap, you are running the factory action "Item: Trim items to selected area" ?

07-18-2019, 07:11 AM	#4
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	Yes...I am running the native action..

07-18-2019, 07:12 AM	#5
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	Would you like me to send you my reaper.ini file ? would that help to figure out what's going on ?

07-18-2019, 07:25 AM	#6
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,797	Yes, sending a small .rpp and the .ini file would be helpful.

07-18-2019, 07:34 AM	#7
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	Here is a link to the ini file and the project https://drive.google.com/open?id=16T...PfR5DUMjhB1XaY

07-18-2019, 08:00 AM	#8
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,797	Thanks, we've identified the problem! Can you confirm the action works as expected if the time selection is much earlier in the project, like prior to 3 hours in?

07-18-2019, 08:21 AM	#9
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	No..I just checked..It doesn't work as expected anywhere in the project

07-22-2019, 03:13 PM	#10
svijayrathinam Human being with feelings Join Date: May 2017 Posts: 1,056	can this be fixed pls ?

07-28-2019, 12:09 PM	#11
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,797	Would you mind checking if it's fixed in the current development build (v5.981+dev0724) ?