Volume jump with hard panning (FIXED)

mawi · 09-30-2022, 04:17 PM

When I pan hard left or right, I get a volume jump of 6dB. Gain compensation does not seem to work.

win 10 x64, reaper 6.68 x64

schwa · 10-04-2022, 05:27 AM

Confirmed, fixing, thanks. To be clear, the problem is that *only* the gain compensation is applied when hard-panned with gain compensation enabled, but the pan law itself is not applied. When not hard-panned, the level is correct. In your screencap I think the source level must be -12dB, not +0dB.

mawi · 10-04-2022, 09:30 AM

I think this screencap shows the correct behavior.

This is the behavior until Reaper v6.64. Before the Pan Law revision took place. The Tone Generator is set to -12 dBFS. When the signal is panned to the side, the signal increases to -6 dBFS.

schwa · 10-13-2022, 02:39 PM

Care to check the latest +dev build to see if all of the pan law issues are corrected?

mawi · 10-13-2022, 05:01 PM

Quote:

Originally Posted by schwa

Care to check the latest +dev build to see if all of the pan law issues are corrected?

I checked the latest +dev build and it seems to me that the Pan Law problem is fixed. I hope there will be an official release soon. Thanks a lot!

09-30-2022, 04:17 PM	#1
mawi Human being with feelings Join Date: Apr 2011 Location: Germany Posts: 1,280	Volume jump with hard panning (FIXED) When I pan hard left or right, I get a volume jump of 6dB. Gain compensation does not seem to work. win 10 x64, reaper 6.68 x64 Last edited by mawi; 10-31-2022 at 04:36 AM.

10-04-2022, 05:27 AM	#2
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,784	Confirmed, fixing, thanks. To be clear, the problem is that only the gain compensation is applied when hard-panned with gain compensation enabled, but the pan law itself is not applied. When not hard-panned, the level is correct. In your screencap I think the source level must be -12dB, not +0dB.

10-04-2022, 09:30 AM	#3
mawi Human being with feelings Join Date: Apr 2011 Location: Germany Posts: 1,280	I think this screencap shows the correct behavior. This is the behavior until Reaper v6.64. Before the Pan Law revision took place. The Tone Generator is set to -12 dBFS. When the signal is panned to the side, the signal increases to -6 dBFS.

10-13-2022, 02:39 PM	#4
schwa Administrator Join Date: Mar 2007 Location: NY Posts: 17,784	Care to check the latest +dev build to see if all of the pan law issues are corrected?